Search results

I am building an 250 size quad and have run into an issue I thought you guys might be able to help with. I programmed using Cleanflight software. I also have a Futaba 10J Tx.When plugged into the software and on the receiver tab I see the inputs I do on the transmitter on the screen but...

Definitely have a bit too little power then. But when it is when i try and stabilize and maintain my altitude that i run into this. I have to be just above 50% to rise. But again there is no mid point. I am either going up or down. No hover.

This has probably been answered elsewhere but I can't find it. I have an F450 and I am ready to fly in manual mode. The problem is that I can get my quad to hover. I have the Futaba 8fg airplane version. It has notches for the throttle. If I go one click up it flies up. One click down it...

So i just got done rerouting and installing all of the upgrades I pretty much can onto my F450 and it is packed! I would like a bit more space. Is there a recommendation on a frame that I could swap everything over to that will give me some more room and is quality? And if I need/should upgrade...

I figured it out. I finally found out the path via this link - http://www.rcgroups.com/forums/showthread.php?t=2189754

So I have been searching videos all weekend to see how to wire IOSD Mini, Immersion RC FPV, and H3-3D Gimbal together to work. Previously I had the walkera 2d gimbal and had it hooked up with my own mini USB plug. Now that the H3-3D gimbal has its own mini USB plug I do not know how to hook it...

You can always contact MaxAmps as well and we would be happy to test out the pack. If it does have any functionality issues let us know. On a brand new pack we can in some cases replace a bad bank. Either way the pros here would be happy to assist you in any way possible. The pictures are...

Hey guys! Join MaxAmps as we take a look at just some of the Multirotor work that MaxAmps has the privilege to be a part of. If you have any questions or if you need anything at all don't hesitate to give us a call toll free at 888 654 4450.

Well when you are ready just give us a call and I will see about getting you our 10900mah packs which should hold up much better.

With an amp draw of 50 amps you should be just fine. I would test initially by flying near yourself and bringing down periodically to test the temperature on the packs. If your temperatures reach or go above 120 degrees Fahrenheit changes definitely have to be made.

Any idea on average amp draw of the setup before adding the additional weight? This is a heavier setup and normally in this situation we would recommend going to a higher C rated pack to eliminate any issues. The pack you have may be capable of handling this load but overtime it will deteriorate...

Dale, There is a reason that the cutoffs are based on voltage rather than mah. Every lipo battery runs within a window. Lets say this is an 8000Mah pack. The over all amp load is going to determine how much mah you can draw. If you are running a high amp draw flight application the pack will...

Dave, Great Question! There are tons of reasons to choose MaxAmps over other brands. Our batteries offer more flight time, have higher energy density, and offer more cycles than any other brand. With specific questions, just give us a call at 888-654-4450 and we can make sure that we...

This is definitely exciting stuff. Can't waiit to see where we will be by the end of the year!

Problem comes with any of these when you have a pack that has a problem. If you plug a pack in that has a dead cell it can either click on and off over and over, not turn on at all, or show completely incorrect voltages. If you are having a problem with a pack use a voltmeter or a good lipo...

Ok. I think I am going to bite the bullet. Next month I am going to buy a transmitter. The T8FG is a solid choice I think. As of right now that is what I am going to start with.

Alot of the problem I see as well is the mixing of separate cell counts. You would be far better off with dual 3s packs than a 2s and 4s pack. The 4s pack has much more resistance and will cause the 2s pack to discharge faster. Having either equal parts on each side or one single pack is a much...

Awesome guys. you are doing great work!

We built one here at the MaxAmps shop. Not going to be able to fly it until later this spring though. It is not Superman but it is a full size guy. We just have to find a way to turn it into some kind of advertising and then we will have an excuse for why we spent the time to build it. I like...

First off thank you for the plug on Multirotor. I am glad we could provide you with the power you need for your setups. It make me feel good to hear that after the fact feedback from customers. Half the time I get to help complete a system for a customer but I do not get to hear feedback on the...