Search results

Here are upgrades that fit on standard cinestar 25mm tubes. THe tilt and roll were purchased from Brushlessgimbals.com and the pan was from a chinese seller. Both are made from good quality carbon fiber. Tilt and roll are for medium size motors. Pan fits the large heavy duty motors. Good for...

All in great working condition. Frame comes with everything you see. Prices shipped and paypal'd Frame- $1200 8x Tiger 3515 400kv motors with 6mm shafts - $525 8x Castle 50amp esc's and 10 gauge wiring harness crimped and soldered.- $450

This is converted from a cinestar gimbal, using parts from brushlessgimbals.com. Comes with frame and motors as you see it. I have controllers selling separately. I have flown up to the blackmagic 4K camera on this gimbal, and it works well. Here is the first test with no post stabilization...

You don't see this everyday. A custom-made lightweight SDI converter, for using blackmagic cameras with an inexpensive downlink. All set for plug and play. It now only weighs 100g. It has a BNC HD-SDI input, a power input with BEC that accepts up to 6s batteries, and an analog video output...

Selling the backup machine. It has not been used this year. Last year it was converted to 500mm booms for using up to 15" props and had many successful flights. It runs smooth, stable, cool, and is good for payloads up to 12lbs. The motor wires are external for ease of disassembly for shipping...

Has anyone had this happen? I did a few flights, all normal, then after switching batteries, my HFP would arm fine, but when I pushed up the throttle, the motors only made some whining noise, and didn't start. Nothing I did onsite fixed it. When I plugged it in to the setup utility, the...

Had a thought today about an X8... what if you run in quad mode but feed the two motors on each arm the same signal, and they spin the same direction? This would still offer redundancy, and perhaps cut down on the turbulence created by coaxial counter-rotating props. Maybe the lower props would...

This is what we need. http://markforged.com/

I have been in love with the footage from original BM cinema camera ever since I got it, but it was just too much trouble to fly, with not enough in the positive category to warrant putting up with its shortcomings. So, when the Pocket cam was announced I was all over that! It has a lot of...

Selling my spares, which I've never needed. I have had a set on my CS8 for almost a year and they fly great and run extremely cool. Never any problems. These are brand new and include a card to get a free castle link usb device for the logging/ setup software. Cost $80 each new Selling for...

Got a new 3515 and noticed it says 3-8S on the box. Not in the specs though, as far as I saw. I might have to give it a go with a spare motor and see if I can fry it but before I do, thought I would check here first.

Not 100% hoverfly's fault, because my ezUHF Tx failed shortly after arming, sending the bird up at 55% throttle and set to RTH... but RTH is not working in the latest firmware for me and probably would've helped. Also, if you notice, the distance to home swings around wildly. I never...

These were used on a hex, always as a pair. All have good punch and hold a full charge. I didn't notice a difference in power between the older ones and newer ones. With factory installed deans plug and free velcro from me. Originally $64+ shipping each. Sold in pairs, the more you buy...

Very nice frame that retails for $1500. Selling for $1250 Shipped, including all that you see plus the MK GPS mount and some spare bits. The same you would pay $300 more for at QC. This is a used frame that has worked excellent for me, both in standard hex and Y6 config. The motor mounts are...

The built-in OSD is great. I have two christmas wishes though. Maybe I'm just not seeing it, but I wish there was an arrow to the home direction, either by the home distance, or on the heading. It's easy to get lost when traveling far out! The other wish is that I could switch to Feet instead...

It flies great. Lot's of fun. Gps all setup and RTH works great. VERY powerful system. Hovers at about 35% throttle and flies for 15 min on 4s 8000 mah. Maytech 30A 400 hz ESC's Naza w/ GPS Avroto M2814-11S Short Shaft 770KV motors w/ upgraded ceramic hybrid boca bearings. This frame is new...

Had an early morning shoot in the mountains the other day and temps were around 45-50 F. When I plugged in the main packs that power everything, the HFP would not boot properly. It would beep continuously and blink green. If I unplugged and plugged back in, it was fine. Happened on almost every...

I think it's a great feature to power the board off the main packs and have that info on the OSD. But if you use a 6s system that creates problems. Currently, i'm using a CC BEC connected to the main power, but that won't show pack voltage obviously. Is it possible to tap the main packs from...

Wanted 360 gimbal. pm or email t i m (at] p r o j e c t i o n f i l m s [dot] com

For those with big octo's, using hoverfly pro, what have your prop experiences been? Does it work better with bigger props/ smaller/ more pitch/ less? To specify motor kv, 4s, 5s, 6s, and AUW would be very helpful too. :)