Search results

hexacop no i havent and after playing arround more with the setting tonite I probably wont ! I have two other problems. A2 only wants the RSAT to be in direct mode, computed mode it not wanted. In computed mode CH1 just doesn't work ! I need computed mode though since i would want to set...

hmm just installed FW 2.0 and hoped i coud use more than 8 channels with PPM but no dosent work ! Little disappointed ! With all the features the A2 offers its a little lame to only have 8 channels over ppm !

think its my fault have a mismatch on the RX TX conceding FW. Thought I used the RX before but its a new one ! Were can i get the 1.43 FW, the 1.48 is buggy or ? Thanks Boris

Normally off ! What ESC motors combo do you have ? Boris

looks like they have 28's on !

yes can be good but why not get the max out of it ! not lifting wise but flight time wise like you want to achieve. I would check the config the kopterworx guys were using. Think that they were going for 8s and bigger props than 18". https://vimeo.com/75063681 But no matter which ESCs you...

finally found the time to maiden the TBS Pro, issues thought with naza V2, random failsafe etc.

You would have another advantage with the herkules. They have a version that can do 8s, probably a better setup for those motors ! Boris

Warmpper can you show some pics from your setup ? This can do it all: http://www.kopterworx.com/Osd-/-fpv-/-hdmi/HDMI-to-AV-converter-mini and it dosent need a power supply can run from the power over hdmi from the cam. You can find similar over amazon for cheaper cant find the link though...

Zaxis as far as i understand any jeti receiver R9 upwards can be programmed to have a ppm out on port 1. You have to read up un it in the jeti forums and update the RX to the latest FW. Second thought I think the R18 was always able to output PPM on SAT2. Its a RX setting though with a jetibos...

just some instances and features that would be nice to have and that should be there already. About performance in generall i cant says anything yet, waiting for the PPM issue to be resolved which might not even be an issue just a false programming of the assitant. I dont want to risk it though...

Yes i can confirm this ! Also reported it to DJI. I wont fly until its not gone ! Boris

Hi Marcell, Bin Sonntag wieder in Wien dann mache ich mich dran. Lg Boris

hmm its a hard one to determine from this video too short would have been great to see some more of these twitches ! In general though this behavior is not uncommon for the WKM when it regulates. It gets hit by the wind and wants to keep position (pretty sure you were in GPS mode) and...

finally getting somewhere, had to switch ESCs a couple times and now sticking to UltraESCs, just a pleasure the easy configuration. KW4 installed. Boris

yeah I guess there is still some FW work to do on that ! Was really happy about these pass through ports that the A2 offers but not a lot of use if only 8 port are supported.

just got the info PPM is limited to 8 channels at the moment !

Thanks ED. Not sure what the equivalent of multi 2 is on the jeti setup but I guess it's setting the ppm channels to 16, if I understood you correctly and multi 2 is a futaba setting and has nothing to do with the a2 controller itself ? Thank Boris

Japp that was the first thing I did, set the amount of PPM channels to 16. If I use the jetibox on the DC 16 and connect to the RSAT, I can actually see that the values on channel 16 change if a flick the switch assigned to channel 16 on the DC16. So i guess Jeti itself knows its 16 channels and...

By the way anybody any info if the Ipad groundstation and 2.4 ghz BT module will work with the A2, Up to now I understand that is works with the WKM and NAZA and thats it ! Boris