Search results

  1. C

    Naza Lite will not connect to computer

    Gotta go to the clinic for blood work, but will try to re-do everything later today. Thanks for the tips/help.
  2. C

    Naza Lite will not connect to computer

    When I plug in my USB cord, I get a message that the device is not recognized. I tried the unsigned driver fix, but still not working. Unisstalled, re-installed driver, etc. etc. Also I'm confused by all the different Naza assistant software. What exactly should we be running for a stock Naza...
  3. C

    Naza Lite will not connect to computer

    Hummm, I'm going through the same cwap! Win 10, Un-installed all my DJI stuff, re-installed, did the driver thing, nuttin !!!! Had to drag out my old netbook with XP on it.
  4. C

    GotHeliRC.com 3D Quad?

    Invertex
  5. C

    Do You Use FPV Goggles?

    I own, Fat Shark Attitudes, and SkyZone "goggles", and three different "face" types (one screen), including Head Play, Quantum, and another I can't remember the name. Out of all of these, I still prefer my SkyZone goggles. All of the single screen types, come with different strength lens, but I...
  6. C

    Good morning all!

    We need to start a "MRA" multirotors anonymous. Welcome to the addiction!
  7. C

    Russian combat drone footage

    Compare the price of a tank, and one of those. They are almost "throw away"!
  8. C

    Russian combat drone footage

    In all honesty, I gotta say, "I like it"
  9. C

    What kind of transmitter are you using with your Naza?

    I liked my Spektrum's, until I got my Taranis!
  10. C

    Naze32 Arming issues when outside

    no suggestions here, that is a strange problem.
  11. C

    1 of 6 of the esc/motor cuting out after arming

    Do some research on those Hobbywing ESC's. I have some that will quickly go into their "program" mode very quick, when you are just trying to calibrate the end points. I can't remember now, but there is a way to listen to the beeps, to get them into the "default" mode. I had to do mine, one at a...
  12. C

    PIXHAWK Failing Internal checks

    Sometimes, there are a few stumbling blocks. Do some reading about Mission Planner setup. There is a way to turn off the pre-arm checks. But in my opinion, they are there for a reason. I live under a giant tree canopy, and sometimes turn off the GPS pre-arm check. I also had a flashing yellow on...
  13. C

    Darwin at work again?

    rainin here in SW Florida!
  14. C

    PIXHAWK Failing Internal checks

    If you connect it to Mission Planner, it will show/tell you the problem/s
  15. C

    Four BILLION Drones Sold Last Year!

    "Nets are for old men" Hey, I resemble that remark !!! (66) Ha!:)
  16. C

    Gimbal connection to receiver

    Taranis set for 16 channels?
  17. C

    Four BILLION Drones Sold Last Year!

    I have not seen any either! Only mine! With all the talk about Christmas sales, I figured I could go out to my front yard, with a chaise lounge, and sit there with a fishing net, and grab em as they flew by! Ha! kidding of course.
  18. C

    almost ready to give upboth

    Hoki, if the screws that hold your motors on are too long, they make contact with the winding's in the motor, and can cause all kinds of problems. Some motors have more clearance than others. Bill, you're getting close!
  19. C

    almost ready to give upboth

    Ain't it a real *****! BUT, sounds like you're getting close. Wish I could be of more help. It's really hard to help, "on-line", but like I said before, this site is full of good people. We'll get you in the air, sooner or later! Funny thing, I've had many a battle with these things, and after I...
  20. C

    ESC Flash problems

    All I can say, is that I have 4, 30amp Hobbypower ESC's on a quad, and 3 out of 5 times, one motor, or another, will studder on arming. Unplug battery and plug back, and usually all motors start and work fine. However, I have not yet found the problem, and until I do, I won't buy any more...
Top