Search results

It may be nothing, but programing my A2 the Mode 3 position switch to toggle between Manual, Atti, Atti Gps, it all looks to work ok except that the tabs don't turn blue like on the manual or on videos I have seen online also the Atti and GPS tabs are gray out any ideas

Does any one have this combination can the firmware be change on this ESC, I ask Maytech and this is the answer: Tmotors have problem compatible with Simon K ESCs. If you use Tmotors, you can use ESCs with our own firmware, 65A-OPTO-HS, not MT65A-OPTO-HS-MK. Hi Sunny I need your best...

Guys this may be an old problem but I can't find the the link that talks about it so here it is I change the motors on my 2nd copter and the throttle is very low it almost took 85% throttle to take off in manual when I switch to altitude hold woshh it almost hit the moon and my throttle went...

Just curious does any one knows who or what team flew multirotors at the winter games in Sochi it would be cool to know some of the details how they did, it how many copters, what gear, what problems they encounter etc thanks

Advantages, Disadvantages

I notice the shape of the MK8 is different than the shape of the CS8 the MK8 fits in a square and the CS8 fits in a circle = MK uses 4 shorter length booms than the other 4 booms, CS all booms are the same length is this right? any one care to comment on the + or - of this configurations ? thanks

Hi to all I am selling German made 8 Plettenberg Orbit 15-20 motors in pristine condition they where upgraded for multirotor use by changing the top plate and shaft from the original straight shaft, the multirotor plate also has 2 locating pins to secure the prop in place, this are powerful...

Hi is there a more powerful motor than the Tiger 2814 that works well with the Mk Bl Ctrl 2.0 thanks

Brand New Retracts Landing gear Photohigher for Droidworx Skyjib Brand new never flown Photohigher Retracts landing gear for Skyjib 8 or it can be adapted to a Cinestar frame or Gimbal it come with pre instal by the factory servo motor I never got to use this retracts because I sold the Skyjib...

I need some advice on to solve a glitch on the operation of my newly install Precision I2C board and ESC's COMPONENTS: MK FC 8 maytech 65A Esc Abusemark Precision I2C 8 Orbit motors DX8 w satellite only CALIBRATIONS AND SETTINGS perform: Throttle cal on each Esc (done) I2C automatic Esc...

Has anyone had cameras stop recording randomly in the middle of the shot? I was flying today testing some gimbal settings with a Sony NEX 6 and in the middle of the flight the camera stop recording, then just as I lifted on a second flight the same, Stop recording, the ovious was ok! fresh...

Hi I am selling 4 pairs of the new Tiger Motor Carbon Fiber 14.5 Propellers this propellers are New in mint condition I am selling them because I bought the wrong propellers I needed a smaller size, they are hard to find so If you need 4 pairs here they are the hole is 6mm they come with an...

Hi to all does bracing the booms help on minimizing vibrations, I have seen a add on kit for the DJI 800 where the booms are connected to each other with CF rods, I know the DJi S800 has arm flex issues and it needed this and another brace along the arm, like a spine, but others in Germany are...

Does this apply to us http://edition.cnn.com/2013/04/25/us/florida-drone-law http://www.thenewamerican.com/usnews/item/15217-gov-rick-scott-signs-florida-drone-regulation-bill I cant find anything that is specific about hobby use, or recreational, or for commercial use, does it only prohibits...

Hi guys I was on the power up for the first time a new all Mk electronics package MK FC 2.0, octo xl power dist board Bl-Ctrlv2.0 pre solder by the dealer,Mk Navi board , and MkGPS and as soon as I connected a 4S lipo something POP and the distinctive electronic smell and of course the "O NOO...

Does any one knows if MK is EVER going to come out with a new more amp capable etc. Bl-Ctrl version .....v3.0... that addresses the issues with the heavier payloads thanks

Hi to all my copter went in salt water "Ouch" I know, ..... all electronics gone MK, stuff, Radian, servos, QC motors etc (maybe Il open a new thread on the crash later dont want to think about that for now) ....all ready rebuilding, but something interesting with the motors, the copter went...

Can heavy hi power power lines interfere with the transmission and communication between a RC transmitter/ reciver if flying near them thanks

Guys check out this case http://www.multirotorforums.com/showthread.php?6623-Shipping-Case-for-Multirotor-Flame-wheel-f550-Xacraft-Driodworks-Mikrocopter

Hi I am selling an ideal case for your medium Multirotor transportation $299 it is literally a brand new case in its box manufactured by Hardigg military cases is a 2 part case bottom and detachable lid with 10 side latches side handles rolling wheels and a telescopic pull handle it is super...