Search results

is that a bearing howling? sounds rough i tried the 9x5x3 on 3s and it just had enough stick to hover on 3s and the pack had to be fresh or it didn't even stay aloft, 4s was a rocketship. just got the 10x6x3 today and there alot more like a 10x5 and 3s had it feeling good. gotta wait for light...

still not bad. are you gonna run 3s or 4s? I'm switchin over to some suppo motors and try 3s with the 10x6x3. Really stoked on those props, they were the only thing i could get to actualy smooth out Can't wait for the vids. Is there a way to make the gimbal act rate mode and follow the craft if...

man, you got it cranked up. Yea, fire it up in manual, when the manual settings are set right, she holds really well. think i'm at 150-150-130-100 then 110-110 on the atti A few days ago i was screwing with the altitude setting and had some weird stuff happen up high so wasn't sure what it...

I had that, but it was constantly for the most part every flight. I'd go into the assistant, recalibrate and it still sucked, so i tried something out of the ordinary, kept noticing my center wasn't center after moving the sticks, but was when i'd hit finish. instead of letting it center like...

i can attest to that. they have a 10x6x3 and an 8x5x3 too mine without a gimbal is 3lbs 9 oz, why is yours so light?

I broke mine but it just cracked the legs underneath and i never replaced em, just ca'd it. watch this if your stomach can take it That was 2 days after i got it, first time i flew it. hadn't got the lipo for it yet, and the one in it fell off and unplugged on it's way out. bent 2 motors...

I'm pretty sure the main thing your registering is the serial number, no? not sure thats stupid, way to keep the clones out of the updates I didn't read all the post, so i may be wrong, but it sounds like your not using the naza version of the assistant. it only shows the 4 types of configs...

the general rule with lipos is theres two ways to get them hot under use. draw too high of amperage or over discharging them. if warm is like 90f , your fine, just don't fly em much longer per flight if it's a overdischarge thing, if it's an over amperage draw and the batteries are rated to do...

there ya go

that sucks...... http://dji-hobby.com/naza/index_en.html half way down on the right

this one has even more of it broke down. http://www.cnchelicopter.com/servlet/the-DJI-HOBBY-ITEM/Categories

this seems to be as smooth as i can get the dji motors..... overall it aint bad, but not sure how long it'll last. Got a set of motors on order

i finally got all my motors smooth, getting the best bearing on the bottom got the final shakes out,,,, but i still wanna try something else. i have a hero2, eagle tree logger and OSD pro with gps and plan flying 4000-5000 mah batteries to go somewhere fpv. if i wanted to stick with 4s and...

I think i run one of those suppro's on my telink foamie, same color/look. I'm gonna cut my losses and try a set of the suppros.... found em at some place called lukes rc planes for $15 a piece, sound right? What sucks is when i first put it together, i had a killer set of motors, then as...

Lets try this angle,,,,, what is a high quality motor brand that'd fall into the 2215 ish 900kv category?

any hints to manufactures of motors that offer shafts a similar size?

I had a bit of an incident that am pretty sure just slightly bent the shafts in my 3s flamewheel kit with the black/red dji motors. already replaced the problem motors, but looking at the 2 i pulled off one just needs a shaft. hate to throw away $40 over a $5 part, do they make em or will...

just ordered a set of these 9x5x3 to try, i've got a similar setup but the 3s version. i had really smooth flight outta the box, but crashed it right off the bat so had to make a comeback. See how when you yaw around and it's like a bad dream and can't see, gets blurry, when you go fpv do you...

thanks for the welcome. I've only been into the 3d plank stuff since september, but been screwing around in my front yard with various small profile foam planes, primarily dw foamies for a couple years. went through 30 or so,all a sudden one day i started rolling, then was controlling it in a...

about half way down http://dji-hobby.com/naza/index_en.html I've got the same setup with immersion 600mw tx and fs on a gopro, the camera records and transmits perfect, but i haven't got much use yet...... got it for christmas http://www.youtube.com/watch?v=eCm3iJVTFx4