Search results

  1. kloner

    Team Blacksheep Discovery build

    awesome! hows that look?
  2. kloner

    Team Blacksheep Discovery build

    Got a decent start on her so will update the pictures. This shows all the esc's glued to the arms, naza is mounted and i'm making esc wires so there twisted and fit perfect. The only thing coming down from the rc rx is a ppm wire (like sbus) and a rssi signal wire or the rc signal strength...
  3. kloner

    who needed the gps mount

    i got that gps mount available. it's brand new in the bag with everything a naza gps parts bag has.
  4. kloner

    Unexplainable NAZA GPS Wreck - Quad fell from the sky but not like a brick

    one thing that i keep running through my head is how your using linear polarity antennas on everything. since there is a known problem with the video transmitter screwing with the rc rx, this would extremely benefit from circular polarized antennas, problem being the real estate were working...
  5. kloner

    NAZA, must you use their GPS?

    the data stream on it is super proprietary and locked up to my understanding. one cat from poland had an osd that cracked that code, but that's the only one i've seen where sombody used something from not from dji using the naza data stream
  6. kloner

    Constructing a UAV with a DSLR camera gimbal

    jes, is anybody in here running a dslr and flying it? seems like most use mirrorless, then theres a group with reds. maybe i didn't pay atention
  7. kloner

    I've Seen the Light

    one time he was the only one in the world with 10x5 graups,,,,,,,i made an order, 5 days later i get a refund and a nasty note saying the site said they weren't in stock and why did i order. Went back to the page i got em and nothing about it anywhere... Guys kinda weird, but if they came...
  8. kloner

    Constructing a UAV with a DSLR camera gimbal

    hahahaha, yea right what else is a solid ap flight system, i kinda keep my head looking at dji just cause is all i have.
  9. kloner

    Naza for FPV & 10" prop

    yes it would. all your trying to do is make that uno antenna see the quads antenna. if it's higher, the quad can be lower. bushes will affect it less low, etc.
  10. kloner

    Unexplainable NAZA GPS Wreck - Quad fell from the sky but not like a brick

    you got 10 lbs in a 5 lbs bag i'm gonna make a short list of things i see wrong and we can go over em one at a time if you need more the ar8000 is nestled in a grip of rx to naza wires = bad that antenna should be out in the clear and not near a wire for lets call 2-3cm for now since there...
  11. kloner

    Constructing a UAV with a DSLR camera gimbal

    just from the little i know, your gonna find yourself in a continuous loop trying to tune something like the arduindo when you should be making money with it. you could save a whole lotta time and make alot more money with something like wookong. it is for the most part plug a play. others to...
  12. kloner

    nex 5n quaestion

    it's 14.2 vs 16.1, but the processor seems to be the biggie along with on screen programming. The back of this camera is gonna be buried in a plane so the on screen stuff won't be so critical. i think this is gonna get my feet wet (no pun intended) and be something i can totaly fly down the...
  13. kloner

    NAZA Responding strangely

    Talk to your guy and see what he thinks about all that...... the red light rapid flash is right, no sound means they could or not have been un calibrated....... never had those exact esc's....... but make sure the guy you got it from knows all this. It''ll be important to save you and him a...
  14. kloner

    NAZA Responding strangely

    OK, now this makes since if the esc's are not flashed with simonK and you turn this thing on with throttle input or even if failsafe is set right with 10% throttle and the craft is booted before the transmitter it'll make the esc's enter calibrate mode. If you enter that mode without having the...
  15. kloner

    Unexplainable NAZA GPS Wreck - Quad fell from the sky but not like a brick

    where is the ar8000 sat antenna?
  16. kloner

    nex 5n quaestion

    that's the only part of this whole deal i understand and saw the differences. What i want to do is get a lens, 16mm i think. What type does it take, this one? http://www.bhphotovideo.com/c/product/695859-REG/Sony_SEL16F28_SEL16F28_16mm_f_2_8_Wide_Angle.html I'm pretty sure this is the exact...
  17. kloner

    NAZA Responding strangely

    I still didn't understand if this is a dji frame, esc's, motor, etc.... yes, naza controls everything. when you turn it all on and plug it into a pc, open the dji assistant, the latest firmware has a bunch of motor idle speed settings. Don;t know why it wasn't set to work but you might want to...
  18. kloner

    NAZA Responding strangely

    and one last thing to try, go ahead and do what you did to turn it all on, put the mode switch to manual and start the motors, is it still doing it? is this a complete dji flamewheel arf or just the naza, if just naza, whats the other parts?
  19. kloner

    Naza for FPV & 10" prop

    aren't you stoked to finally fly the thing, it's soon man, that's sweet
  20. kloner

    nex 5n quaestion

    I'm gonna show how dumb i am about this, did i buy an A mount lens camera, says alpha? I suck at this. read for a few hours but i just gotta get one, love it at first, see the differences first hand with whats different. but i need to make sure i don't buy the wrong lens to fly, that'd be be...
Top