Search results

i got into this habit ever since getting the 306b of checking the IR from time to time and one of the things it does is measures how much loss is in the connector. You measure it through the deans and it'll tell you the combigned IR, then you unplug that and plug in the balance connector and re...

do me a favor and complain about the shipping cost. i complained and told him all my friends were whining.... it'll help make a point

who is that at?

they are in stock,,,,i just talked to him. You might try calling them tomorrow or wait it out them putting the inventory back in the server.

I posted the fines in another similar thread,,, it was like 10k to 100k and up to 4 years in the pen, but seriously, nobody is getting made an example,,, yet. think the "law" there trying to enforce is operating a uas/uav in closed airspace..... theres no physical law that say's what we do is...

I've had 25-30 models in the last 5 years, probably a hundred batteries. there are 32 actively used packs here now. if you solder them when there is a male and female together, there is zero chance of them coming out of alignment...... Those help people by not needing heat to melt 10 or 12 gauge...

these http://www.heliproz.com/2818-EZ-Solder-Coupler-for-Ultra-Deans-Plug/productinfo/745357/

that sucks they threw that reverse polarity bit in there at ya.... if it was me, i'd get a rp sma for the antenna to crimp on and forget an adapter. that 5.8 is touchy to adapters...... the ends are pretty easy this guy is really fast and cheap...

i think the heat takes the spring out of it.... there only flaw,,,, but i have deans on everything. i couldn't afford to change if i had to there is also some crimp on thing you can solder to a deans to make it easier.... forget what there called

pixim, look at 1:10, sun in the lens and the water is totaly visible ccd hadII look at 1:30, suns not even straight in the lens and see how dark. the pixels is the weak signal, the dark is the cam mid day flying, i notice the 600 vs the 690 lines a little, but the light problem doesn't...

the ccd doesn't quite show the dark part as good when your looking at light,,,, backlight i guess is the term.... i thought it'd be alright, but i don't like the ccd hadII...... me like the pixim. There only like $82,, i need a couple more of them, change out the sony soon. it's on my zII

i bought a free flight one i think it was, had smoke pouring out of it just trying to hook up the programer,,,, christ..... naza, no problem, them open source controllers, kloners scared

you crazy manual flyers,,, show me what it looks like onboard?

yes but when you get to flying and trying to fine tune videos, especially the naza gains and oscillation, fff gets hard to tune..... if you don't hold the stick forward as far as it can go for minutes on end, it'll last with 9's forever and you'll most likely never change the prop size, but if...

it has a different look don't it.. What kind of gimbles are there for this size heli? do they got them counter balanced mounts?

if this was me, i'd order the prop adapters and props form v-east.... there a straight drop on for graupner or any other prop for that matter.... no special adapters to add to the thing.... http://www.v-eastonline.com/products/Air-screw-coupling-.html that fits the 4mm shaft motor...

Christian, yes, that's how mine is now.... except mines all the same pack, but off a bec

i get them at Altitudehobbies.com,,, these are the 2810 version http://www.altitudehobbies.com/brushless-motors/peak-suppo-motors/brushless-motor-peak-450-35-28-1000kv-suppo-2810-12 that red line about using 4s is me,,,,, these will hover all day long and lift alot of weight on 9", but there a...

i use a bec, castle ccbec........ didn't change mine much... i bought a cheapo hitec high voltage servo and am going to mess with that next. This is driving me crazy, it's so close to being acceptable, but post stab on my problem makes the clouds look like they dance watch the second scene...

the suppo have a better bearing but they require getting a different set of prop adapters. if your interested in the suppo, i'll find you the adapters at tower that are like the graupner ones, but not the shipping costs..... the place is out of controll at v-east. i use a set screw type instead...