Search results

yes you will, they all do to fly stright when you push straight, calibration clears up them flashes like your talking about, usually

what are the gains in auto pilot in assistant set to? the 10" slofly props are synonomous with that... but you can up the yaw gain to 130-140 and it should mostly go away..... when you calibrate the radio in assistant, if the green bar shakes that can cause this too. throttle to middle stick...

you'd need a sniffer..... i can't for the life of me remember the brand,,,,,,, but it's a brand name synonomous with the product, $200

probably is, theres no standard... need a picture of the back of the board cam to see the wires there? just the three wires

most people that want power are in the 900kv - 1000kv,,,,,, 750 is a better lower kv setup for an extra 30-60 sec a pack but less power doing it to use, 4s and 9" prop,,,,,,,,, the 900-1000 can go 8" on 4s, 10" on 3s, then you got 1300kv and those like 8"-9" prop on 3s........ some motors call...

that is a serious concern pant,,, there not out to anybody i know in rc..... were the only ones that care about rf,,,

the motors you show looking at for replacement are smaller and less watts handling that whats on it now..... Your better off with a shorter larger diameter for what your doing, 300 watts or better if you plan going fast or carrying a real cam. overkill is fine,,, were all overkilled on the esc's...

UrbanDrones.com P.O. Box 9393 Coral Springs, FL 33075 Phone: 720-FPV-UAV1

mm, your a guy used to good footage, get the latest firmware on it and turn on protune........ try it, amazing. import em through cineform studio, apply the protune settings and output a mp4...... they got these things recording uncompressed. Takes a high speed class 10 and alot of it. About 2...

I bought a few things from em, got there sticker sitting here on my desk so it wasn't too long ago and i'm used to ship the next day, get it in three days so yea, i'd be concerned too. I don't remember having any problems Have you tried calling them?

i woulda thought more along the lines of a ball gag..... hahaha

need one of these http://www.autotoolworld.com/Wall-Lenk-KLG550-Trig-R-300-550-Watt-Heat-Gun_p_186614.html i use this one for power connectors and crap. flows out solder fast. Got it back in teh 90's when i'd do car audio, they used this thin multi strand in 2/0 and bigger for power, tinning...

when places make stuff for rc, they try to avoid making rf noise in that frequency cause so many people use spektrum, futaba, etc. sattelites aparently use or in the next wave of 1.2-1.3 cause it very much so affects 3 different sattelites i have seen myself. 5.8 vtx in general just makes things...

I absolutely love my futaba 8j...... it's just enough quality to be worth the extra money and the link you have between your fingers and model is unmistakeable. i only tried it with the supplied tx once on a build, but the customer went over a mile with it no problem. I tried to buy this a few...

ah, it never crossed my mind to run one...... made this double end plug for the wall that makes it so simple to plug and go,,,, but sometimes i'll charge mr tx batt, 4 cell nimh at .5 amp and wonder if it needs all that racquet to do it..... takes forever too cause it discharges then charges...

crap, that's him flying it....... congrats dude

great job bills if your for real. shes a piece of engineering beauty......... What state are you out of?

I was gonna point ya there but obviously found it

do you get this today?

if any of you guys are looking for deals on hero and hero2, there all over the forum classifieds right now.... absolutely flooded market. supply is high, demand low = great deals to be had. hero2 on protune is pretty clean, almost the same thing with the slower older processor but the right...