Search results

you got me bro, what your showing me isn't normal

when you get into long range receivers like ezuhf, dragonlink, the like, spektrum radios are fussy, dragonlink just flat doesn't work. ezuhf works alright, but there ppm signal uses shifting and that makes it un-stable for talking to lrs systems. futaba is a straight up 5 volt ppm, not this...

you want to read the manual about setting the gains....... a bone stock rig does alright at 130 across the manual line and 90 on the atti line. it generaly behaves but yea, there not perfect till your skills to tune em is there. good props goes a long ways there. but if your crashing, good...

page 7-8 http://www.team-blacksheep.com/tbs-core-manual.pdf your current sensor on the disco is 100 amp so set as such

were those pictures of wk assistant suppose to be hooked up to the model?

hmmmmm...... things to try would be hooking the yellow form the cam straight into the yellow of the vtx and bypass core,,, work? just gotta start trouble shooting it when that shield goes on, it is super easy to slide solder over onto core..... it's all super tight, was why i mentioned that...

man, wouldn't we all. good question, that's alot of weight on a 450. not alot of room for big enough props

what are you trying to lift? grams? big money or not so big of money?

ok, so help me understand what all i'm looking at. unless pictures are mirrored, skewed, etc, your pinout form the transmitter is still crossed up. the top picture is from the link you gave me. lets call the bottom the shortest side from edge to plug,,,, left as shown here. white, yellow, black...

i'd make sure to balance charge everytime if you did...

I'm a little confised so i think this is the problem.... i think it is powering up through the audio channel. the wires can be unclipped from the plastic end and resorted. theres no standard, each company does it's own thing. I've had the setup you have here and it was perfefect other than...

yes, that is what you need. 2 places to look are tower hobbies and hobbyking. grub screw type. grind flat spots on the shaft. I've had em loose and made it home

usually the red wire is power, white is audio,,, are those reversed? just to eliminate it as a problem, is there a chance of getting the tin off the core still?

the spektrum DX8 almost broke horizon and spektrum. It had three major return to manufacturer recalls. i have friends that left thousands of dollars of models in pieces behind em during all that, would just lockout and there models flew off into never, never land. it changed the way horizon...

when you roll the sticks, is the green sliders moving to the extreme ends of the scale in TX Cali? is d/r setup?

it looks like it will when the channels aren't matched. can you put the rubber antennas back on and test with those till you can make it work, then get fancy again with the cp's. Show me a macro shot of the wires where they go from the bottom frame to the rx and cam,,,, the solder on teh audio...

is the kayak from that clip you pulled the other day? your really good at getting that rock, tree, whatever to blaze through the shot like that. You got an eye and a set of fingers.

your on fire..... the ropin was cool, what was the one shot that looked like bison? it went by fast, but looked 3d?

so the trick is if you use a cctv type dvr it makes the firmware for that part not blacking out happen at which point they all work. ie http://dx.com/p/single-channel-mini-dvr-audio-video-recorder-with-sd-card-slot-53835 makes em all with a/v inputs compatible. downside, that thing is a little...

2 more reason. it has sbus so one wire instead of 8 to hook from rx to fc and when you move on to fpv, head tracking and LRS uhf systems work much better on futaba, it has a true 5 volt ppm out, no hacks, mods needed