Search results

  1. kloner

    AP Hexacopter - advice needed

    at least a cheaper frame and throw away motors. the esc's will make it through most crashes. I'd get a f550 if you had to have a hex and get ready to learn how to fix it. That frame you mention will drive a poor guy to the street crashing like your gonna
  2. kloner

    Battery Question

    yea, if there fresh then there ya go, your in. i fly 8000 mah and 10.600 mah in pairs of packs. I've bought 3 TP packs and every one of em was junk when it got here. I;ve bought well over a hundred, would say closer to two hundred packs in the last few years and them turnigy have never let me...
  3. kloner

    LED on NAZA itself?

    i'd say it's more likely you either have it nesteld in total darkness or it's always illuminated and the alt hold just sucks or you just haven't flown it at the right time, right direction. I flew mine for 3 months, then one evening i put something on a model and was chomping at the bit while...
  4. kloner

    Battery Question

    something else worth mentioning c ratings are a measurement that tells the user how many available amps a new pack has. That is dictated through the quality of the cells, the the matched of those cells to make packs and the parts used inside like how thick of wire, etc. a 1000mah 30c pack has...
  5. kloner

    Phantom arrived @ Kopterworx

    hahahah, the fix
  6. kloner

    Battery Question

    c ratings are a mesaurement of a brand new lipos internal resistance. While to some it might sound like extra money being wasted.... others look at it like a lower internal resistance gives better performance as it is used,,, like 100 cycles in it's not showing it's age, it likes to charge and...
  7. kloner

    Measuring internal resistance of LiPo's....?

    icharger and fma have it as a button you push, tells you the ir. on mine, just the main plug gives you that, with the ballance plug in shows you each cells resistance, the difference is the ir in your plug......
  8. kloner

    cheap fpv gear

    I'm a part of the ritewing thread over at rc groups and there sure is a big cross section of folks over there. anyways they brought some gear to my attention that might help some of our members here get into this easier than they expected. the first up is this monitor, is suppose to be a haier...
  9. kloner

    Phantom arrived @ Kopterworx

    i think the majority of ding dongs out there already have an f450-f330. imo, this is gonna cover those really young kids that'd otherwise get into rc helis or whatever else and the older guy that can't believe a toy he bought at a hobby shop doesn't have a battery plug in the box. I could see...
  10. kloner

    Unique in the world ! 5.8 GHz Receiver Module for EasyCap USB Capture

    that is pretty cool. this is non airwave,,,, what all systems does that work with?
  11. kloner

    nex5 ?

    the stabilizing part that's in your zoom lens but isn't in that $250 16mm lens.
  12. kloner

    nex5 ?

    the regular cheap 16 doesn't have ios...... theres a few that do but most are money. guess it all depends what your doing and what you got to carry it all.
  13. kloner

    TBS Discoveries now available in the states

    there good friends of mine and take good care of ol Kloner
  14. kloner

    GPS/Compass

    i use black paint, as thin as can get it and have zero reception problems. one time i tried plasti dip and it came out too thick, didn't work.
  15. kloner

    How difficult is the setup?

    some things to get an understanding of in the location screen where you put the measurements in for where everything is can be tricky. make sure + and - values are right. red vs. green...... the closer you get all that and the better you understand calibrating it the better off you are in the...
  16. kloner

    NAZA firing motors full speed

    was the imu cali jumping around alot? what a pos, when did that start?
  17. kloner

    NAZA firing motors full speed

    on a windows machine, Start, DJI, which ever version you want should be in that folder, start it up and it'll want it's firmware on the naza
  18. kloner

    Tau Labs CopterControl case available

    this post is about cases so naturaly i answered as such classifieds at rc groups, here, open pilot.org are some good places to watch for used flight controllers like that.
  19. kloner

    FPV + Battery Advice.

    if that's the case the $10 wire is a $40 wire and the problem is it's SD live feed like the security type cams, but the security cams have alot of features that make the picture perfect in the craziest conditions/backlight, etc. here is a good pixim fpv cam gopro 2 in protune not as easy to...
Top