Search results

  1. kloner

    Licenses to shoot commercial AP and AV in the US?

    wonder how many things out there that are unlawful in the US......... what is that?
  2. kloner

    900mhz Antenna Help DJI F550

    you want a patch for the cleanest, but the distances your talking are no where near what there made for....... the closer you are the narrower in feet that beam is, just keep it in mind. Quads and 2.4 or 5.8 are really the way to go cause of antennas if no other reason, just takes 433 rc to run...
  3. kloner

    Licenses to shoot commercial AP and AV in the US?

    says the guy from Canada... hahahaha they'll sell you insurance for all kinds of stuff they never plan to payout. there attorneys are pretty sharp to the rules when it comes to a claim. the paperwork will get you on the job, but i'd blow an ape to get away from authorities being involved in...
  4. kloner

    900mhz Antenna Help DJI F550

    I found using a monitor made it alot easier to fly with because of a few things. You can look up and see what it's doing, where it's at etc. goggles might be fun to fly, but they hold you back imo because it seems like so much going on. When i started 6 months ago, i did gogles a few flights...
  5. kloner

    Some Still images GP hero 2

    That is eagle tree osd pro and a naza......
  6. kloner

    Looking into getting into this hobby

    think it's cheaper
  7. kloner

    Working voltage for motors

    they all vary but the two your talking about above are 4s i'm pretty sure.......... some will do 6s but there is lines where props are available in left and right hand, kv of motors and cell counts match up, then to be MR orientated so the prop adapters stay on, etc. No i do not think those...
  8. kloner

    Looking into getting into this hobby

    consider a futaba radio. it makes use of sbus so one wire goes form your receiver to naza instead of 8 and if you ever go long range uhf your dialed in with the right radio. Futaba uses ch3 for throttle and that's common in things like products from DJI, mikrocopter, etc. it's kinda a big deal...
  9. kloner

    FS: S800, Wookong-M, 6S Nanotechs *AS NEW*

    well that sucks. I've never had a problem getting pm's unless the box is full.
  10. kloner

    Build TBS Disco modded to X8 AQ FC and ESC32

    smart to stick with what you know at least at first It'll be interesting and i'll be listening all ears forward to how the cg get's ironed out. a couple things changed, you lowered the cg with motors underneath, increased the rear cg with more packs, but increased the power x2........ man...
  11. kloner

    Some Still images GP hero 2

    you should try some lights underneath, at least fore or aft so you know what your looking at. a naza in atti is pretty dang reliable when you do it. my first journeys through my yard were a few way up views, and having a set of lights let you know exactly what was up. An FPV cam would make it...
  12. kloner

    What is more stable?

    bart is testing that combo on that test stand he made, but more for coax efficiency
  13. kloner

    Some Still images GP hero 2

    try waiting a little longer and take it way up to clear that mountain....... sunsets are best at least back away from mountains so you can actualy tell when it is. Looks like an hour too early man that looks cold where you are..... brrrrrrrr
  14. kloner

    Leopard motors

    You should talk to Garret. He's been targeting the 3d plank guys so his selection is half way there. The sizing is the outer dimensions so if your not used to that, it's deceiving.. I got an under gained flight with a sticky gimble recorded with em so far. I would by no means consider this as...
  15. kloner

    900mhz Antenna Help DJI F550

    your thoughts on a 910 antenna only being for 910 mhz isn't right. An antenna has a range of at least 500mhz,,,,, in 2.4 it's the same antenna used for 2310-2510,,, in 5.8 its the same antenna for 5680 as it is for 5940...... the tune isn't a big deal, what is the interference from stuff around...
  16. kloner

    What is more stable?

    I've been going through a transition from normal fpv quads to big stuff, to carry nex-5's doing my thing. Those parts your listing are awefully big. the giant pancake motors are more for slow smooth shots, most doing 6s like an s800 would be expected to fly. higher kv motors speeds em up some by...
  17. kloner

    TBS Disco ESCs’ flashed simonK or DJI standard ESCs’ for new Disco?

    I just installed 14 of them in 2 rigs. one i calibrated the throttle range, the other i just flew out of the package and neither has lazy starts, both are super stable. needed zero programing, just like dji's. make sure to trim back the power wire, i bailed all but the signal wire meme, i can...
  18. kloner

    Hoverfly Flying In Cold Weather -12C- Video

    :43-:45 1:08 theres a ton of it through out i wouldn't know, San Diego's never seen anything like that. we get hotter than hell, but no white stuff
  19. kloner

    Some Still images GP hero 2

    whatever them trees are tall up is the shot the new driveway or just a random whatever?
  20. kloner

    TBS Disco ESCs’ flashed simonK or DJI standard ESCs’ for new Disco?

    I recently made the switch to the ipeaka esc's pre flashed with simonK and couldn't be happier. no lazy starts even in low idle settings in naza......... super fast to correct. This is with one bum motor, but check em out and i agree, ditch the osd, and use the core. you won't go far enough...
Top