Search results

i use these exclusively, alot of guys like there pz-0420 http://www.securitycamera2000.com/products/690TVL-HD-Ultra-WDR-Pixim-SEAWOLF-Sensor-chip-OSD-Camera-3.6mm-lens.html the pixim has the best contrast, easy to follow and find stuff afar. the 420 to me was too blurry

no red wires into the naza,,,,,, it is self powering everything from that thing with the light that flashes

when you look at the front of the cam, it should have a upside down L shape on the lens housing, from the back, the big long plug towards the outside of the frame and the connector closest to the bottom plate. You have to carefuly remove the screws on the lens part (careful not to loose the...

naza has a built in bec in that light thing you plug the usb into every one of them plush esc's has a bec in it. if it's not dissabled, your playing with shutting down an esc in flight from over heating or worse, fire. You can not run more than one bec on any circuit. they don't do well...

I'd get the shield they charge $10 to install the core. i personaly couldn't get the dam thing in, it's super small and oh so hard to solder in. Burned a hole in my first board and destroyed a core within 2 minutes of being powered up the first round when i tried soldering. i personaly don't...

yuri, what did you do to disable it? can the servo wire just be removed?

see how thick the wire is on the foxteck, that's bad. see the size on the circular, that's the correct scale. if i wanted the closed type, id get the immersion set. this is pretty much what i set all my friends up with...

that's what they do to ya....... relit my fire and am blown away at every step of the way.

tell me about it,,,,

hahaha, atta boy...... i didn't try the real saying, if i'd have known it was gonna be this kinda party, i'd have stuck my richard in the mashed potatoes........

it wasn't yours,,, it was my hex

yes, only way i've ever ran em and they work bitchen.

my personal opinion skip the esc's there and get a set from here. be it any flashed simonk or or the optos. i've had best luck on the dji speed controllers, probably the best thing they make simonK do need throttle cali, for 4 esc's total, i'd just calibrate em seperately, wouldn't need the...

flight log,,,,,, didn't know there was one. It is definately associated with the waves i'm flying by, gets worse turning into and out of the wind. Stil alot smoother than alot of others i've flown, jut bugs me to not know if it's something $30 could fix

yea, sits totaly still, move the model a foot and it'd register, move it 5 feet it'd peg at the top, down to ground, went back down...... it actualy got off pretty easily. ate a hero3 case,,,,, landed straight on it. smoked a set of batteries and countless motors, props, but the boards alright...

we've been watching it in another post, pretty dope you gotta hit that little video tape looking icon and paste the link into the dialog box

had the foam over the sensor,,,,,,, and lemme tell ya. That's the devil switch. ate my model......... flipped the switch, it did it's bitchen drop like it been in my yard, except this time i knew better so went out in the open. when i hit the throttle, it went apecrap, flipped up 45 degrees and...

Sold

heloman is suppose to buy it today....... if he has a problem i'll let ya know before long.....