Search results

think you missinterprited me. nothing about a crash. when a chineese kid put your model together it is easy for them to push too hard with the pins not lined up on a connector and bend over a pin so it doesn't sit in the wire right. i've done it myself. you unplug a wire, look at the pins with a...

the pcb under naza is a receiver i guess? has a ppm or whatever. nice little rig, they should make the 550 like thatall those wires need to be pulled out, check the naza connectors aren't bent over from being put together wrong, make sure there all the way seated after that, etc. just a general...

does rcgroups have a phantom thread? alot of times the common problems show up there first, it's gotta big group. it's usually one post that ends up thousands f gs

that seems extremely reasonable

naza has a thing that plugs into it called a VU. it is the thing on the craft you plug the usb cable into....... it also has a status light, the light on naza that tells you whats up You say theres no VU, i'm saying its the thing you plug the usb cable into. it could be some weird extensions...

thats awesome. the possibilities are only limited by your mind and you can send off for sure files and not screw up what did a setup cost? like to where it makes stuff

what are you plugging the usb cable into? is the light on the same part?

it vectorizes stuff real time, assigns it gps coordinates and is 2mm accurate. weird little camera for sure. looking forward to doing alot of projects with it. There interested in long range fpv and were talking about putting them on zephyrs, seems like a better smoother platform for longer runs...

the unit itself isn't balanced very well. it's got a pile of lasers and sensors on one side of the drum. it is usualy hard mounted to a car. According to these guys at this conference, none of them there has ever seen or heard of a multirotor carrying one. it was a concept idea to these people...

it's got them avroto motors like his, just a little lighter and 12x6 props is 34 amps hovering...... it'll go to 100 amps fff, it's like 14-15 minutes hovering and slo flying on 8000 mah, 7 minutes fff i'm gonna run 1 5000 pack on a back mount and a gimble up forward now with a hero so i'll...

dunno, I'm just a guy like you it'd really help if you used another pc.. goto a friends/parents house and try it. if you can't trouble shoot it like that you might hit a run around. it could be one device or driver on your pc causing some sort of problem. sometimes different ports on a pc are...

that's awesome. Can it print super soft things like vibe dampners or is it all a hard plastic? be sweet to suspend things from a super tiny area but have a wide base and total control of it all. silicone an option?

call your dealer, to me it never worked and you need to take it back to get checked out.

im not sure those servos are 400hz... if the gimble isn't balanced real well it'll run harder. But why do you think it's the gimbal. a rig as heavy as yours should be 30 amp hover. I'd try the 10" on 4s and i'd try to put a bec to power the gimbal the early battery alarm indicates the pack has...

try another pc

that's hillarious, like nobody will notice it being a clone.... hahaha

get a wrench and make sure the wires are plugged into naza all the way i haven't seen this pop up here and i'm here every day. it's not a normal thing you got going on

had a couple people ask about weights so wanted to add it. This sensor system only needs a total of 2 lbs sky. to the best of my knowledge it's the smallest one out. It is what sits on the Google driverless car that makes it sense and avoid

your lg, cam all offsets the top mounted batts. if you pick up your choper ready to fly by two opposing arms and work your way around, does it always hang level? try all three opposing arms,,,, alot of nice parts for that frame is that the long red gimbal? cs8 gonna carry it?

the part they call a VU, the thing with a light and usb port are known to fail/never work..... it's what sounds like is happening. Whod you buy this from? wonder if yours uses the naza VU like the rest, should but i'd double check green light solid when it's hooked up means it's in motor...