Search results

you aren't suppose to chase recoil, your chasing high speed oscilations or not. The higher those gains are without wa,wa,wa,wa the more it'll feel like hfp in manual. atti is the one your gonna chase with bouncing back to level,,,,,, try 120 on the manual line, 90 on the atti line and try it...

haha, they figure that's the line where if it's too hard they'd rather you had it built, they offer it you will make both ppmpads bridged with solder, run the iron across the vtx pad and it will unbridge then solder across the middle to 12v pad to enable.The rest of the adjusting for hero on a...

you can create profiles within BGC that would let you have up to 3 preset settings, then it'd just be a matter of getting all three set for whatever cameras. The gimbals themselves are designed around the camera size it needs to carry. just like servo drives, a little hero gimbal wont work with...

its important to go straight to balance to not ruin a good set of props, sand the heavy side trail or leading edges till an ear drops then balance that ear with sanding on the bottom flat surface across the chord. as you lighten the heavy ear it'll try spinning on it's side again, get it hanging...

my camera man brought it to me, pretty cool rag

leopard hands down. there like a tiger with the prop adapters etc. The adapters look crazy bent, but when you spin it up if the motors smooth run em. you can get ipower prop adapters for there 2814 line to replace the stock leopards that are alot nicer. hard black ones like tiger but 4 bolt...

were hoping t shoot some promo pics this weekend or early next week, when we do i'll share the 900 on 4s with 9" props are money on the pro. the 780 need 11" or 5s with 8's or 9's.... and it'll do that. the arms are done like boris's as in cad drawn but less droidworx and more origional. they...

this rig of my friends is that setup and man, something wasn't right. those arms suck butt,,,,,, were gonna change that i want to try them 2814 amp/tiger on 6s with like 8" props..... maybee 9's i couldn't be happier with the leopards. bummed he isn't gonna carry them anymore. There not selling

in my experiance flyaways are often to do with vibrations or mechanical failures. I send my jib up anywhere, and i mean anywhere and never had a direct problem with the controller. I've fried motors that sent it in once, fried a power filter another time to the flight controller and it just shut...

to carry something like the load you got there would take at least 28mm motors like 2814.... SMP, i've always ran the 1 watt lawmates off core and never had any problems. you can't loiter on the ground. . we noticed though it was having problems yesterday on it's maiden so maybe that's where...

i've never been around a naza that wasn't at least 100 or higher in manual gains, 90-120 on atti. what was it doing that made you turn it down so far? naza is never going to be as solid as hfp in manual, but who flies that and owns a naza..... i'm atti all the time. take off, land, shoot, etc...

the only time any camera i'm filming with doesn't have a or a stack of filters on it is in the dark..... i'm on the 3 stop, 4 stop and polarized filter set.... the polarized over water looks really cool.

addicted

the pro with 3515 tigers and a Droidworx ad quick release it's 1870 grams..... the 6s packs i'm flying are 435 gram, hero is another 100 grams I'm really after them older discos as well, 3 axis gimbal this was a proof of concept we did, now there like a stock looking deal, just better...

i run one on my jib and on our 800 with iosd and they both work but i got the buck converter on the rig, it powers this and the lawmate transmitters perfectly, no heat, little failures I though the dji iosd passed through the battery voltage? 11.2 would be fine if it does that...

yes except most people use 1.2 and 5.8 with the 2.4..... i've had some mixed results flying two 5.8

we fly 2 complete video setups all long range gear. 433 on the rc controller and the gimbal running at two different frequencies and there hopping. the video is 2.4 for the pilot and 5.8 for the gimbal even when i can easily fly LOS i'll go straight to my monitor. its my happy place. the camera...

i'm on 1.43 ezuhf firmware. for the pro it's ppm out on ch1 and the rest is normal. i used a wire from the ppm and a wire from ch8 go into that frame, ch8 controls which cam your watching, the rest of the rig is on ppm, including gimbal control. you have to solder the pad in teh battery area...

was it powered up when it broke off? sounds broke

its the insurance when you check out. Spill and fall. We crashed a gh3 and chipped the lens. They picked up the bill for a new one. All our cameras are on it now except the reds we get the additionaly insured waivers. I think the co is sq trade insurance, something like that. when you check out...