Search results

how big and what brand? immersion 600mw you want to move the power down to an esc power pad instead. if it needs regulating like lawmate it needs a regulator. the core is taxed being used as the alexmos power supply.

wanted to keep track of what airlines accept and don't as well as additional fees. US Air took us for $200 each way for oversize bag fee. Going out it was over 100 lbs packed the way it was and they denied it. just the jib and av200 was 75 lbs cased and ready for travel.....

Good stuff guys i settled on a cinebags dslr/lens smuggler as a personal item, pelican 1510 for lipo carry on, Cinebags High Roller to check in the parts/tools/chargers, etc. and the AMP custom jib case..... gotta watch the jib case, can't put much in there without it going over 100lbs and...

they gotta be mapping something

it is really hard to fly through a stabilized cam like if you used the gopro for the main flight cam. The idea is to fly through the main cam, switch over to the gopro to frame the shot, fly through it for a bit if you want, but to flip back to the hard mounted cam to fly. Sometimes naza is half...

this sounds like when a video tx is wired straight to the vtx wire to the top board,,,,,, what is the vtx? hows it wired?

that's a trip, we got one down here too.... whats in them things?

did you see the part that these are pre order? you can still get in on them https://www.gothelirc.com/shopdisplayproducts.asp?id=244&cat=DSLR+by+Etec

uh, yea. you might want to start with a rental. There not bad price wise, but if your gonna fly it get some uav insurance first. Of course were always for hire and come with all that

payment sent, thanks

i want it... take paypal?

the rc shutter lanc for gh3 is pretty solid,,, only start stop and trigger but consistent compared to them ir ones...... it is 2.5mm 4 place plug on the lanc

good job dude

Wish you would have brought it over to the hotel the other night. We had a pc that was working firmwares (we changed channels) on our gear The good news is you only use a pc to update firmware and to assign channels different like to make jr work with dji preset channel configs. It also has a...

with the ezuhf on 8fg you will need to do a couple things. Pry the futaba trainer connector apart and get the +vcc wire clipped, i pull the pin right out of the connector. then on any dji controller, you need to set all the sticks and switches to middle possition and bind the rx..... then put in...

anybody using any of the Cinebags gear? twisted, was it tsa or the airlines themselves not liking the bigger cells? theres a amp hour limit in the rules, but alot of tsa isn't enforcing it yet or doesn't understand it

I'm curious to what some of you guys are using for traveling gig to gig. more looking at what you use for lipos, tools, supplies, etc.

we just did b roll between scenes. there is 7 or 9 aerials each show repeated a couple times..... Sorry we never did a reel of just those,,,,, it's there condos, hunting beach pier, huntington beach surfers, huntington bay boats and paddleboarders, both hospitals...... 40 6 minute flights in a...

the u8 is for them 28" props,,,,,, alexa lifter or 3d red rigs....... the differences are japaneese vs chineese bearings and the u8 has a cnc wound winding so it's precise and supposedly really efficient. At that level of the game i'd go all in with tiger