Search results

thanks kde just what i wanted to here will be ordering soon for my next build.

let's also not forget about solar flare issues.

Benjamin seam's like your going with the movi so i would think you want something that can carry dslr's on it. i don't know the weight of the m5 but should of course be considered. Since you got the octo already for me imho an x8 would be a little redundant unless your going for space saving...

keep me posted mombasaflah. i know this is a build thread and don't want to veer of course but i know some dji support people are on this thread. since a lot of people will be using the a2 including me soon i would like to avoid any mishaps on my rig that i'm building if possible and i think...

yeah you can just sodder Benjamin if you want...no bullets... since you need step down still think the power disc is a nice setup.

sweet cloner one for neg one for pos under the red capp---copper? nvm- it's all on same side?

What esc's and motor's are you running?, there was another member that had some type of motor control issue w/ the A2 setup on a hex and i'm trying to figure out what was causing the issue for him. he ended up loosing the crafts w/ a gh3 zen setup. He was having some type of stutter previously...

there has been some talk between simon k flashed maytech's and compatibility issues with some tiger motor's. your exact motors don't seam to be an issue but on some other tiger's like the u5's there is issues. going to research more.

Hi KDE-looking forward to the esc's from you guys at this time... though currently i own turning plush's will those work ok w/the kde motor's?

Tecee were the maytech's with simon k or without. it's possible to buy either i believe. i would like to get to the bottom of this cause i'm going to be running a very similar build.

hey Ben-looking forward to your build KDE on paper and that manufacture video look killer. Seams a few are going the coaxial route. Copter-kids i just read are running a carbon core cortex and are liking the portability of being to be able to fit in a pelican case fully assembled i believe...

ok Tecee i just came across a thread on another forum about simon k may tech esc's causing very similar issues with guy's craft rocking back and forth during flight. he is using different motors then you but there still tiger's. Apparently when you calibrate the esc w/ simon k w/ some tiger's...

the a2 has built in hardware for futaba radio support and also supports channel mapping for more then 8 channels with futaba radio. i have heard of several issues with spectrum on a2's like dropping satellites seam's like futaba is the way to go on the a2.

So sorry Teecee! i was really hoping and pulling for your rig to get sorted flightime wise w/ new batts and now this. Sound like the esc gave up or some type of battery issue like the copter was having a hard time keeping up with amp draw maybe. What kind of power distribution are you using...

hey blade are using the 5dmk3 in the test?

gimbal performance looks nice Kloner! hear ya javajack about moire issues-my 5dmk2 was terrible in that regard. i haven't got to use a gh3 so didn't know it had that problem most of what i seen looks very nice but never really looked for the issue so something to consider. i hope the gh4...

kloner-was that on a zen, was it hard to rebalance if it was. the gh3 kinda kicks *** and i feel that it's kind of under appreciated, sharp as a tack even at wide angles something canon dslr's have a bit if trouble trying to do. my 5d performs much better on longer lenses as far as detail...

hey blade what size packs were you running, looks like a nice design that fixed some of the issues on the s800's. Do the arms have any flex?

if your client knows nothing about rc you can tell them it's a professional system. go pro set at 2k stabilized and defished on a zen hero for realestate vid will be fine. for commercial work probably not gonna fly- no pun intended..lol if i had a dollar for every time i heard someone say they...

is there a specific reason that dji was first to develop reliable brushless gimbal in 2012 before anyone else that performed better. was it cause they had resources or were just extremely talented people were working on it? i'm just wondering why not too many companies can deliver a product...