Search results

Tuukkuli when you yaw the ship to pan do you loose horizon or hold it. i know when a 2nd operator does it you loose it..let me know what they tell you if an update is on the way or being worked on than all can be good. i keep asking around an get no response back- so don't know if that implies...

i'm not sure how you would go about testing because they seem to fly ok till they don't. just buy turnigy plush's maybe not the best on the market but proven to work. here is the thread so you could read of other's experience recently...

htotheunit-there are some guys i came across with maytech non simon k esc's on tiger motor's and i "believe" been ok. There was a special way to calibrate the simonk versions i heard talk of using 110% throttle rather then the normal 0-100% to calibrate them-this is not confirmed just what i...

socal blur were talking bout the carboncore cortex incase you wanted to check it out and didn't know by the pos yett. Quinton very helpful info for sure. i had a suspicion things would be different when the FC was controlling them but didn't really know since i don't have retracts so this is...

sweet glad you got it sorted. usually the guy has gotten back to me super fast on Facebook at least when i asked questions. i forgot everything sit's on the bottom plate cause the batteries sit on top if that's the way your gonna do it. yeah i bet it was an oversight i don't think he has too...

yes certainly an issue for some setups. i believe some go with the xy version instead of the normal x so the booms y out more. other then the mantis arms i don't know of a solution but have seen what your talking about. with big props i really don't know how it would be possible not to get them...

here's a test not by me........ coaxial vs not. there is another test i can't remember where showed similar data 25-30% loss vs flat... the data was on another forum though i think.it's been a while since i seen it. https://www.youtube.com/watch?v=tFJyE3Uns3o&list=UUq2rNse2XX4Rjzmldv9GqrQ it...

Scott- the thread is under the cs8 section called -my new heavy lifter project. i'm not sure if i can cross post on here with links. if the data was available here on here i would link the post. personally- i would aim towards 50% hover cause i am efficiency obsessed type of guy and play...

being that NAB is around the corner i know of at least one red solution that will be released Filmy not sure on the details or cost other then it will be revealed and no it's not dji btw.

Peter-my 2 cents-400kv should be fine your not lifting a heavy setup. i would go with something most efficient look at your auw then divide by number of motors find the thrust you need per motor then look at spec sheets- match voltage and prop size e calc is no longer free so if you don't...

are your guy's issue like this----https://www.youtube.com/watch?v=rd3obMH8vm4 not my video but on youtube and public. is there anyone on here with a 5d gimbal that doesn't do this?

Quinton- whats the word on the streets? i went to bed and you were still tinkering woke up and are you still tinkering?:nevreness: i see you got them to work did you try using the fc to handle them yet. doesn't the fc get powered by the pmu--are you saying there was no power hookup xt60 or...

it's just a rumor a this point but makes sense. they should be able to fix the tilt issue with firmware---i wouldn't count my pennies though that light bridge will work with existing gimbals and have full 3 axis ability.. if you think about it you need hdmi cable out to the air unit. how are...

Gotcha. M5 looks good cant wait to see some samples. I imagine its being released around NAB time like the m10 was last year.

Just a heads up the rumor is all new dji gimbals are going to be released at NAB in a month to accept light bridge. Looks liks no dice on having all axis's and light bridge on existing zens. So hoping for a firmware update is prolly not gonna happen thats why no dji support guys ever respond to...

SteveM-you run filters on a zenmuse setup. Do you just leave the gimbal unbalanced and let the motors do the work or add weight to the opposite side? Thats the limitation on the zens there only balanced for one lens no filter wasnt sure what the best solution would be other then adding tape or...

Quinton some guy on another forum said switching his futaba rx from a mode to c fixed non working retracts. Also said to check sub trims to make sure there on one side or the other- whatever that means and assign to 2 way switch not three Maybe give it a try.

Give the legs a little push and see if they open:) on a more serious not gotta be the adapter? Are you wiring it to a two way switch- do you need endpoints or any of that stuff setup. I imagine its an off on type of thing right. How do the dji retracts work doesnt the a2 automatically detect...

Quinton i dont know too much about the inner workings of retracts but Trent from copterkids on another forum said his retracts were not working on his cortex and would get stuck down. Its on helifreak. He said the servo actuation was week. You can check out what he wrote- google cortex and heli...

yummy on both parts!!. stretched disco- i can spot them legs and attanna placement a mile away:) using ezuhf? no offense if that's your girl btw. haha. wait a minute- all intra on the gh3 meant interlaced? yuckk!!! i never knew that i just figured it was just bit rate settings not that...newb...