Search results

O.K I have started a new post for Octo users that are having problems with the 5.12 update, can you please post info there for me please to pass on to DJI

PLEASE POST HERE.. Myself and a dealer here in UK are actively dealing with DJI direct to solve the 5.12 Octo problems ONLY OCTO USERS TO POST HERE PLEASE I have just got off the phone to DJI engineers that have stayed on late to speak to me via a DJI translator To try and resolve the issues...

At least it appears PH are doing something about it? even if it is just keeping people up to date.. Which is more than can be said about DJI?

Yes hopefully they will sort this one way or another? I have to deal with DJI problems also as I fly an Octo and with the latest two firmwares there are serious problems.. So its basically put my machine out of action between the two companys :(

Same here, I have tried this and other ideas, but still got the servo jitter.. Hopefully there is a solution soon? as I am losing filming time.

I also have Octo in I formation but with custom motor mixing, but have my cut off set to immediately as when it was set to intelligent it caused a crash and broke the legs on my octo... How you ask? it was a windy day perhaps a little too windy really? but I decided to fly and see how it coped...

My Octo is using a custom motor config that I wrote, as originally I was going to use the APM2 and hardwired everything for that? so rather than redo everything I just wrote a custom motor config instead.. So probably nothing to do with config? just Octo I did send DJI an email with a diagram to...

I hope it doesn`t take too long? I am losing time and money on the filming side of business..

Is it only Octo users that are affected? we are the only ones using ports F1 and F2 as motor controllers? I haven`t checked thouroughly? but I believe most of the issues are associated with Octo users?

I am getting quite alot of servo jitter in both roll and tilt axis..

FW 5.12 for octa SAFETY ALERT I have just upgraded WKM firmware from 5.08 to 5.12. Octacopter "I", batt: 4S, ESC: CC Phoenix ICE 50 fw4.01 (set for MR, outrunner) "Old" type WKM controller (december 2011) After upgrading the fw I went through all tabs and reset /wrote the settings, new TX...

O.K as I said yesterday, I would move my GPS unit up and recalibrate. Then try POI mode and see how it flew generally? Well it certainly made all the difference in the world.. It is so much better now, and everything works much more stable. So perhaps I was too hasty in blaming DJI? but if I had...

No Dave I didnt check the lights, I was busy ****ting myself at he time :) And there were no stick inputs until just after it touched the ground, I then throttled up to stop it flipping and then flipped a few switches whilst trying to figure what direction the sticks made it move just before I...

Found the footage of when I tried POI the second time and things went very wrong.. The fun starts around 3.35

Yeah taht does look stable.. Mine has gone in the opposite direction and is now very unstable, I think I will go back to 5.08 as I had much more stability and control

Does anyone know how POI should work? I have been out testing 5.12 today and tried POI the first time it yawed to face the home position, well more or less? and just stayed there until I used left or right stick at which point it would circle roughly around the home point as slow or fast as I...

Does anyone know if DJI have tested this on an Octo yet? or as a customer is it my job?

Try 8k$ without camera.. Not good, has cost me lots of time and some money messing around trying to solve the problem... At least it didn`t cost me any damage to the machine or property?

This is a problem with the new firmware 5.10 and Octo`s It doesn`t work and will not work until the firmware is fixed. A way around it that I have found is to reinstall assistant 1.26 and go to firmware upgrade, it will reinstall 5.08 and everything will work again until the problems with 5.10...

That is something I have considered, but actually doing it? I dont think is possible? Unless someone can show me otherwise?