Search results

Hi Siteline, i personally am happy at the moment with the Hercules II. For me the benefits. 1. Once you know how to do it. Simple fast installation if you dont go the way of a custome heat sink like i did :) 2. Weight reduction compared to single ESCs, compared to my Turnigy plus on the Hexa...

andre tell me how far you have gotten with the herkules. If you cant send it back and you are not getting the cable. Tell me and i will get you one or make one for you ! Boris

Hmm I normally but in the values of the axi 2214/22 and than lowering the KV and raise the max A to match the QC. Those this look right ? Weight is 5.2 KG with everything on cam and lipo etc.

one of you playing arround with the QCs in Ecalc yet what values are you guys giving them ? Thanks Boris

Guys wanna run 6S tomorrow, but i am a little freaked about it. All components are 6s capable anything else i could have forgotten about ? Should I worry about the speed my props could reach at a certain payload ? I dont know the maths to figure it out ! Thanks Boris

No Prob I thank you sending out the board monday morning Thanks Boris

everything sold ! Thanks Boris

haha nothing to apologize more of this ! :)

I will be able to tell you guys more tomorrow. I have the 6s setup and 12 x 3.8 11 grams CFK ready for tomorrow. Did a short test with the 12 x 3.8 in the apartment letting it stay in its ground effect and there is like expected a huge difference to the 14 x 4 !

Okay NAVI GPS GPS shield are sold. Okto dist board reserved for Shawn at the moment Shawn here the vid of firing up the boards. 4s to it http://sprealinvest.at/fire.mov Boris

Hi Bartman Shawn ist on it for the moment. I will tell you if he doent take it ! BOris

Hi Rick, I think its not easy at the moment to get them. My dealer got two and i was lucky enough of reserving it right away. Check the swiss guys aerodron.ch digitech.nl and the other european dealers DW has on its website. Can one of you give me the dimensions of the CX ? about height...

I can only second that. The frame really makes sense and has a simple minimalistic approach the way it should be !

Hi Gary just use standard turnigy plush they can do up to 6s ! http://www.hobbyking.com/hobbyking/store/__2165__TURNIGY_Plush_40amp_Speed_Controller.html I have them on my hexa and cant really complain. Or http://www.hobbywing.com/english/ArticleShow.asp?ArticleID=444 inoffcially...

Okay getting some price together RC Carbon 900mm Boom HEXA RC Carbon Landing Gear 300 mm version New about 800 $ since extended booms : Price now 500 $ 6x AXI 2820/14: New 131 $ a piece, 786 $ : Priceg now 450 $ 6x Plush Turnigy: New 21 $ a piece, 126 $ : Price now 80 $ All soldered up...

It would be really nice if WKM would allow you to read out the data from the gyros and compass just to test what is going on and if the placement of components are affecting them. Like we were used to it from MK.

GGoodurm dont wast the money on the QCs get the Torx or what ever they are called from Geoff same motors both from RC tiger ! Probably Geoffs are even better and a different prodcution line. I had some issues with the shrink tubing at the motors case, not a gib one but why should I be fixing...

The BEC output pin 3 and pin 8 GND are there for powering the MK FC. Preferably i wouldn't be using it for anything else. So in the case of WKM just leave it untouched.

And it would acutally be better to solder on cables with bullets right after. The bullets are a nice idea, but you constantly have to check them that they didn't loosen because of the vibrations. I still have to do that but to lazy at the moment

jesus !!! what the .... i would have send this board back right away !!!! This is the what the soldering of the gold connectors should look like. Anything could of gone wrong with that amount of solder !!!