Search results

I am puzzled. I just cant get the same althold behavior on my CS8 as on the HEXA. For some reason the CS although in althold tends to make little jumps or gradually rises or descends. I would be happy for some input what the reasons could be ! The throttle responds is also very different on...

Seb those are the Aerobot i wold really not recommend them ! And compared to the MK they are 7 grams heavier. They are just as heavy as APC so there it acutally no big reasons anymore to switch to them, only maybe because of stiffness etc. http://www.lcc-shop.de/index.htm under props is also...

Japp CF would make sense. Look at the props in the MK shop 11 grams 12 3.8. WKM setups really like lighter props ! Only problem they come 5mm you have to drill them to 6mm. Which can be a hassle and you have to balance them again. Drilling only works with a stable setup otherwise they are ruined...

Hey Seb, looking very good ! keep us updated about your progress on tuning it. One advice with the WKM although it hurts a little for a setup like yours or mine considering the mz CS 8 build, WKM performs better with smaller and lighter props. But you are on the right track I think the axis you...

keep me posted because of the motor output if it dosent work maybe i can help you ! Boris

Ah okay if it worked before than it's a DJI prob. Update again power cycle it like recommended. Set everyting to default in tx configuration and see if it works. I had the prob a couple times upgrading again solved it. If it doesnt solve it something wrong and you will have to contact DJI. Boris

Your futaba needs extra power. Is there a light on on the futaba RX ? You can use the bec output from the pmu module to power the rx. So separate the white cable from the pmu from red and black. White goes into x1 or x2 don't remember please check to tell the mc the voltage state. Blak red...

Andre send it back to Andreas. If something went wrong because of the messy soldering it will go back to Andreas any ways. Sp shortest way is to Andreas if you ask me ! Andreas and his guys are just setting up two WKM birds to check them out, so they know what they are doing and have it set for...

CX in stock http://www.kopterworx.com/CX-Series/CX-4

can one of you from experience say how much loss they get on their lipos in the winter time. 10 % 20 % less flight time ? I know it might be different for different kinds of lipos just interest to hear some thoughts on this. Thanks Boris

okay found my fault not going to mention it. I am embarrassed :). Flight time is 4:55 minutes plus another 2:33 min in a different log file, landed the bird in between and Unilog for some reason wrote another file. :) = 6.88 min and i think i can squeeze some more from the lipos. Hope to do some...

that the answer i got in RCgroups when i had the same error with my first build CFG-ERR(8) is a configuration error. It always happnes after you upgrade the system or abnormal tx calibration. If you have this problem, please calibrate the tx and reboot the controller. It can also happen after...

Seb what does it say for the error cfg-err8 ? dont remember ?

If i ready the data correctly i was left with 3600 mAh coming from 6900 mAh. Drainage of the lipos should to 75 %. Wondering thought why it showing 6900 its a 6000 lipo. Thus 4:55 min flight time usage of 3300 mAh 75% should be 4500 mAh .... 3300:4500 = 4:55min : x x= 4500/3300 *4.55 =...

I am a little confused my self at the moment. Just measured the Lipo with the 4s recorded flight and i have 15 v left thus 3.7 per cell. What low voltage warning do you guys have for 4s setup for the WKM ? including loss etc.

I wonder why i have so strong voltage drops at the beginning. Not normal or ? Didnt remember that with my MK observing he Jeti, could it be the cold ?

Nice results though Gunter, especially were you have it travel right infront of you. I wasted a whole day with my **** AV 130 on, should have strapped it down and not let it do its work. Jump and bumps and obviously from the tilt. I dont get it preforms differnt every day no consistency no...

Okay some data, 4s flying with a 5 KG total setup weight cam lipo etc. 5s flying i had something wrong with the voltage warning and had to bring it down. Fly was without the canon on it so probably around 4.2 KG weight A2 Value is the temperature of the hercules FETs. I think one can...

I still cant make a decision although i am tending towards the NEX 5n or the NEX 7 once available. One of you mentioned that there is no big gain from the NEX 7 towards the NEX 5 ? Considering the adavanced sensor in the NEX 7 and the ISO values you guys dont think NEX 7 is worth a try ? Thanks...

I really would love to try it !!!! But before i haven't seen the DJI gimbal in action in hands of a customer i will not got for it. At the moment though I would buy the CS gimbal before anything else. I am so sick of PH and the AV. They might be okay gimbals if you constantly fiddle with them or...