Search results

I am not so down with the WKM view since it based on a notebook. I see no use in it since i want my data on the Radio mobile to move arround Up to now i am using unilog to get some tele from my wkm birds but all the tries to get it working with xbee have failed, probably possible but i don't get...

Thanks guys for the advice and i will try your recommendations. Or i am just going to buy the axi mounts for the QCs. I just cant find the little detail that makes the difference. Same prop same washer same nut AXI QCs

His doing what he can to solve the problem. At the moment he cant say a lot because its just awkward behavior and we dont have any info helping us at the moment. But i am going to send some vids of solo picloc in action and the gyros in the tool etc. Although I cant replicated the behavior on my...

I don't want to discredit picloc as a product and I think it's a good product and sets new standards compared to any FC stabi we had up to now and fullest respect to George and his venture! But I just can't get mine to perform on a constant level. 2 flights go well and the third ends in...

Suspecting that the motor mentioned in the topic are all the same anyways just having different specs, I am pretty sure they all share the same prop mounts. For some reason its a odyssey for me to get the props mounted and really tighten them. On several mounts the threads are already damaged...

ovdt would you still be interested in selling single components ? I would be very interested in the GPS module, PM me maybe we can works someting out Thanks Boris

How could you forget the Red bull Racing how could you ! Personally hurt as an austrian :) Ups forgot the quote, WAS DIRECTED TOWARDS YOU DENNYR

Sorry for anybody interested in the Hexa but the last couple week i just noticed how good it is to have a backup machine and therefore my hexa is great. So i am not selling it anymore. Apologies to anybody being interested in the last couple weeks. Boris

You should have seen my face from point one were i noticed no more response from the radio on the copter to the point were he started a fail safe routine. Close to crying and than a smile on the face. The auto take off i can only explain that it shortly had a connection again to s-bus cable and...

How failsafe saved my *** today :) Took the bird up for a quick one, RC carbon HEXA WKM. S-bus cable got loose guess because i was playing with picloc yesterday loosening some cable by accident. After take off you will notice some harsch jump that was stage one were s-bus signal was lost. Funny...

dma251 are you getting a clear init sound from your ESCs or only a short mechanical twitching ? Did you calibrate your ESCs? boris

Thank you i will give this a try. Boris

Hi Hexacop, should be possible from 5 to 7.4 v check : http://www.multirotorforums.com/showthread.php?1564-Where-is-piclox-3x&p=17368&viewfull=1#post17368 interesting with the 1500uF Capacitor, what the theory behind it ? thanks Boris

Config is easy, if you don't forget or misunderstand a major point like I did :). Japp I also think to have heard that mounting picloc will be possible in different orientations, isn't it already in two basic?. Upside down would be great in most cases I think to reach the USB port easier. One...

The first calibration of the acc. and gyro have to be on a complete level surface. Probably better to do it on a table instead of already mounting it. Safe the calibration values and take care that acc cali is not checked for every startup. As far as i understood it can only be mounted...

ja well hobbywing cant be their last answer though. I am fine with my hercules, www.andreasbaier.de, but there has to be additional high quality options for people who want to take up expensive equipment !. If my camera equipment even in the lower range is around 1000 to 3000 euros, i think most...

Dr. Sevilla, thanks thats what i was also thinking that some are not compatible at all and wont work. But its a silly one because there has to be something different on port M1 than on the others. DJI should be able to change that. Or if they would finally say make a list which ESCs work and...

Hi Holco, no no its mounted text up 100% the same like george showed it in his video with the 200 AV. I think it was really the problem with the acc cali. being on at every start up. Just flew one lipo and everything was okay. Now i am going to put the cam and do a second test, if all the...

George just came back to me. Concerning my issues and we might have found the fault that I had calibration of the acc. on at startup. I hope its solved with this have two more lipo test quickly before the night comes. Thanks George ! Boris

Hmm i am really not happy. I ordered two units one standard one pro. The standard i had to return since the USB board port whatever had some issue. Now the second picloc misbehaves. This is now happening on a regular basis. A yaw results in a Roll and Nick/Tilt axis movement on the gimbal...