Search results

Very cool i like this Makrolon. I cant really find any infos about it. Do you know if there is any Polyvinyl chloride ​in Makrolon. I would be interested to give the material a test drive on the laser cuter 5 mins from my house. Him not being able to cut carbon makes the machine only usable for...

no worries you will be fine with them. I had them on my MK octo they are very good motors !!!!

Very cool ! Had a smiilar idea to stick the cc board in my CX to try it out. Probably will have some questions to ask you once i get to it. Boris

holco wasnt talking about the pot more the voltage trend that all of a sudden starts. Just pointing out that its always a danger in this market to follow these upgrade blindly before you haven seen them in a real action. Boris

To tell the truth i am not really interested in faster ! I am interested in smoother and a gimbal that gives me a jitter free cam handling when i fly my bird with dual rate 80% expo 30%. Something like this: if for real, will never be achieved with the hobby servos combo potis on any gimbal we...

Really rtf with MK or WKM ?

Gary check out this post http://www.multirotorforums.com/showthread.php?1067-CS-8-WKM-Herkules-II-Build&p=12138&viewfull=1#post12138, still the same. Just in my case everything more or less revolved around the hercules. Boris

Sandor if the Aerodrive is based on the MK BL Ctrls firmware you will not have a lot of luck. But maybe you can clarify it the Aerodrive has its own firmware or the same as BL Ctrls. Boris

what I like for once I can actually get the bird balanced. Or even better the gimbal can be adjusted in so many ways that I can balance the bird with the gimbal. Boris

Japp its actually a star like formed plate thats directly attached to the vibration dampeners which are mounted to the main frame. And the gimbal again is attached to the camera plate. Boris

Killby have you done any changes to the gain setting yet ? Boris

Thanks Site, i will check them out. But i think they are actually missing the mounting part to the CS frame itself. I got 4 screws were 3 have the same size one is different which is strange. Troubled me but i think it is a mistake from them etc. Red i think both birds are equal and the AVs are...

jupp looks good i am actually going to ask george from picloc what he thinks. But that would be a good spot. THanks !

You have the following options. Octo with gimbal stabi from WKM. 1. Futaba Radio and Recevier S-bus. 2. Any Radio and Recevier with s-bus converter. 3. Radio for witch you can get a s-bus module from Futuba, has to be "Fasst" or module for your Radio from robbe called "Rasst". For which...

But the thought that you are not ganing much with the s-bus adapter is right. On the one side you gain octo plus gimbal stabilization on the other side you has just as much cable mix mess as if you would be using a standard receiver, even more actually.

which axi motors were you trying to simulate in the eclac ? the 2812/22 ? If you stick with the approach that you want to use bigger props 13 plus and 6s, although some use higher voltage on the axis than you should probably go for the QC or the Torxs Boris