Search results

All i hope is that we are not seeing a PH DJI cooperation on the gimbal, otherwise i will be the last to adopt and really wait this time for enduser reports. But reading a lot of threads in different forums there is a lot of sliming going on between PH and DJI so I wouldn't be surprised :) Boris

Jesper what king of gimbal/servos do you have ? with which voltage your driven your servos ?

really hope for us users and for them and their venture that it will be as good as advertised at the beginning, would make me happy. What do you mean with the screen video display stuff ? Can you say something more about it. Something similar like a jeti box for your radio or OSD stuff ? Thanks...

summing it up i am sorry to hear the probs you guys are having with the WKM in combo with the Herk. I cant replicate it at the moment and really hope Andreas comes up with something in the next couple days! I somewhat feel responsible because I showed that it works with the power surges nearly...

Gunter if you try it out first i will make the graphical explanation again of how it works :) I am still undecided if I should get the waypoint setup or not. I remember although having the possibility with the MK that i never used it once. But it would be fun. What really would be interesting...

Just copied that from jetforce from a different thred Good Morning, Muunk. THIS MIGHT SOLVE YOUR PROBLEN. Seems that there was output problems with okto on channel 2 WooKong M firmware version: 5.02 WooKong M User Manual: 2.3 NEW UPDATE NOTES...

red but you have MK or ? ah sorry was reading to fast !

blind this morning were is the sneak preview stuff ? Htnaks Boris

As long as he doesnt share it with those in need, I personally think its better to be considered a lie. Sounds better than i just dont want to help (because my arrogance was scratched), although i needed your guys help before :) Thanks for the info 5.02 !!! Boris

Than again i have 5.0 on my CX with the herk inside and dont have an issue. I am going to flash on FW on onto that herk board and see if I have any issue. !!!

I guess its a combo of things. For me the surges were most noticeable with my 14 x 4 wooden props and i dont remember if i was flying 4s or 5s. It would seem though more reasonable that with 5s the surges should be more often since the current drawn should be lower in a hovering state. But i am...

Japp my preferred combo is. 5s 5000 mah one or two with the 12 x 3.8 CFG from MK https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=75&products_id=613&zenid=c7ad00120fb4412d3bac5291d85dc50b lightest probs ich could find in this sizes. Boris

Hi Guys, i want to get a light simple test frame to test different FCs for the fun of it. Any recommendation for a simple but robust build ? Would be great if its also a cheap solution. Should be a quad. Thanks Boris

looking good ! i was thinking about using th gopro as main camera faced forward and having a small fpv cam at the back just to switch over if i get into an iekky situation. I really dont know a lot about fpv does it make sense to use the gopro as a primary fpv cam ? It give vid out during...

Just doing the same with my CX so i would be able to report in a couple days if i get any similar results. But i guess its quite obvious that its the video transmitter, you dont want to mount it to the landinggear and try it that way ? Boris

similar to this than you know your birds okay

munk actually the best would be get someone to hold the frame over his head by holding the booms. With props on give some gas and he person should start moving the copter forward back left right. The resistance or the motor compensation should be the same all the ways arround if it is not you...

From the config i dont really see anything majorly wrong that would make your bird flip at take off ! Did you check everything from the cabling soldering side concerning the motor wiring ? Take off you props have the motors spin up and rock your bird forward back left right etc. and see if you...

By the way i would mount the futaba on the landinggear sideways. If you look in the manual of the futaba RX the two antenna should be separated from each other on a 90 degree angle. Having it directly mounted on top of the plate and the antenna just munched in somewhere will not give you a good...

What this yellow tape construction you have your IMU mounted to. As far as I can see on my RC carbon frame there is a hole in the middle. Is this IMU frame connection really solid ? Boris