Search results

HI Wookong, also wenn du attitude mode fliegst und du (EINEN) gelben Blink von der LED hast also in altitude hold bist darf dein Vogel nicht an Höhe verlieren egal in welche Richtung du ihn steuert. Das gleiche auch in GPS mode. Bist du sicher in alt hold in beiden flug modis ? Wenn ja muss...

okay done, wondering if i can test or have a indication if the patch is actually working. Its night here and not enough light in the room to really see a quality difference. File size or media info would give an indication ? Boris

ah get it the letters at the bottom, could hardly see them on the small screen cut off Thanks

Okay now it worked ! But i am confused it is showing me several availbale patched for the firmware V 1.0E. But i wanted to use the flow motion setf.ini ? Is it included in the available patches or how can i load it to use that file ? Thanks Boris

Maybe there is an issue with me downloading it from a mac and bringing it over to the PC, will try from the PC direclt. Already download the GH2__V10.bin serveral times and still the same ? Thanks !

hmm i am not getting this to work. Did the following. Downloaded installed Ptool 3.63d Got myself the Flow motion patch Download the GH2__V10.bin firmware. Started Ptool gave it the file GH2__V10.bin and is dosent want to take it with the message: Wrong file or already patched ? Would be...

Thanks i was confused about the hacks which to take etc. Gonna they the flowmotion ! Boris

Have the following settings now on the V2 please comments : I am not sure about some ? 1. Brake Type : Off 2. Battery Type: NiCD 3. Cut Off Voltage Threshold: No Protection 4. Motor Timing: Auto, Not sure about this one but probably wont get around testing. 5. Sbec: Irrelevant for the Opto...

Just did the same have the distribution finished and started programming them. I was confused from beginning. Normally i am used to ESCs giving out beeps over the motors if no PPM signal is connected with the V2s nada. The programming card with the little display didnt work at the beginning an...

I am using WKM with the hercs, but several others are using them with MK. FC and Navi added to it is no problem, with an OSD it might be an issue. But i personally wouldnt add an OSD setup to a Dedicated AV HL plattform but thats a question of taste. One more thing concerning the Herc WKM combo...

nisouck thats the game ! Only someone with the exact same setup as yours and6 not only motors ESC combo could give you the info. But even than i would try i Boris

Thanks Dave, i was confused :) Didn't try or consider IOC yet and don't have it assigned so I didn't expect it would already be part of the LED feedback ! Boris

to tell the truth even when you give us prop sizes weight,payload your aiming at, voltage you are running, I am going to tell you to start with low timing and test your way up. Things than to look out for are: ESCs temps Overall stability of the bird Flight times Motor temps Borid

No it shouldn't be a problem ! But at the same time before you go crazy on finding an issue on your bird, give it some more tests if you find some exterior influences that might effect the bird. Full SAT lock down dosent automatically mean the its good GPS info...

I really like the Du Bro. Had several other one and most of the time one important aspect is forgotten. The axis on which the props are being balance has to be 100% level so horizontal otherwise the whole balancing act in my eyes becomes useless. Some of those magnetic balancer although close to...

Also a good choice. If you have a chance get some with the Atmel Atmega chip on it. They you have the chance to flash the ESCs with a multirotor specific firmware which could eventually increase the overall performance ! Boris

Damm its a hard one to pin point ! The only two variables in the equation that changed in my eyes is the lipo has been drained which i cant link to anything and that you changed from an open field to a area with trees and other obstacles around. But this is also a week explanation. The only...

nice thing also is if you want to use it with MK your system still stay 6s compatible. You have 8.5V I think out to power the MK FC. Normally you have to change components in the MK FC to have it running with 6s Boris

I just finished up two today. For me the benefits are also that it has an independant firmware and one doesnt have to wait or aks MK H&I to change something ! one of my temp logs, Value A2 is temp max 8 degress, 5.5 kg octo flying, but outside temps were around 0 he has the decription also...

Hercules is up to 6s and 100A per motor with FW on and heat sink. Ask Andreas www.andreasbaier.de