Search results

Can you test it in manual with someone holding it over head and you ginving throttle in manual and the person telling you if it get light and wants to take off or not. Dont let it take off because it to dangerous for the person under it, but it also havnig issue in manual than i would really say...

Concerning 3s you shouldnt try it, you are way over with 3400 grams. 4s is also on the heavy side but doable. Okay coming to the point it worked before and now not anymore. I never had any DJI ESCs but can you calibrate throttle just like with other ESCs and have you done that ? Any...

david what props do you have on ? Just doing an ecalc for you in the background ! Boris

Mit herk v4 gibt keine mir bekannten probs. Welche FW hast du drauf ?

Japp heb im attitude ab. Manual beim WKM ist wie manual beim MK aber mit dem Zusatz von heading hold. Also kein autoleveling. Manual erst probieren wenn du ueberhaupt so fliegen willst wenn alles wirklich passt. Boris

Haber Firtz du bist dir bewusst das manual mit dem WKM wenig mit dem Manual wie beim MK zu tun hat. Autolevelling beim WKM ist er in Attitude mode aktive ! Lg Boris

How much weight do you have on this quad ? Boris

Hi Dan, I guys you are trying to connect the transmitter over a plug like this to your Camera. Take a spare plug stick it into the camera, hook up some chinch cables to your TV setup or monitor some output were the TX is not in the game. Keep the plug bare dont solder anything on and test...

Zell did you try messing with the com port settings in windows. Set it to 9600 Baud for the comport configuration - Windows Hardware configuration. Might not be the case but was a old game i always had to play with my xbees Boris

Nice one Matthew, If i can recommend one thing ! I would consider to find a spot for the receiver somewhere outside the canopy and away from as much carbon as possible. Maybe on the landinggear. But for the initial flights not so important. Boris

japp looks better again lets hope it turns out this ways !

kloner I am totally clueless about the video antennas. I have the 5.8 ghz cloverleafs and i am happy. So i got the following for the 2.4ghz system now but i need additional und don't now which. Got this for the 2.4 ghz 1000 lawmate transmitter...

I was told that the record is up to 43 Km or miles not sure :). I am happy if I get a 5 Km range that would be crazy already and letting me get creative how madly i am going to toss the two birds around the lake by my country house. I am just not sure anymore if i will equip both birds with CC...

Thank Mat, huhui have my 433 stuff setup :) worked like a charm out of the box with the small cable hack to get it working with the spektrum ! and the first bird ready, to maiden if i wouldnt have forgotten to order all the prop mounts ;( Waiting now also for the HT FPV bird from...

Dan, most important part is how you made the connection between the camera Videosignal and your Video transmitter, can you post a picture are you sure all the wires are correct ? Had that once were I soldered a 3.5mm plug for a gopro output and mixed up ground with the video signal only got...

PaNt promised a video from the Rccarbon when you wrote me a PM: little vids since the screws of the av130 back than weren't tight, but i think it was a perffectly usable frame. Quality of the video is bad, but completly raw etc. And flying with no expo or dualrate i remember so the stick...

Japp just like mentioned before in my posts tried all the different settings also concerning startup strength and no change. But maybe that's a hint were the problem might be. Looking at the video at every second start up V2 is using a different startup strength once normal the way it should be...

I must agree with you on this one. I noticed back then when i had my fingers on the motors giving them a little resistance they would have jumped out of the startup problems right away.

Just to clarify further. The choice of the 35A over 40A, that would have been more suitable for the 2820/14 you are right ( a close one ) was because of the size of the 35A compared to the 40A. Specs: Specification AXI 2820/14Voltage range 3 - 4s Li-polyRPM per Volt 860 RPM/VMax. Efficiency...

Hi MaytechRC,p please look at the video. I never used any probs they didnt burn during flight, but at dry tests on the ground. The issue already started when firing up the motors the first time. 2 of the 6 produced visible smoke during the procedure you will see below, just starting them up...