Search results

Just tried them out. I cant get the 88mbit version to work with any of the SD-cards I have. Gonna try the 44mbit one and see after low level formatting my cards. What the fastest SD-cards out there ? http://www.eoshd.com/gh2-patch-vault Boris

you need this part and stick it into the shorter cable thats coming out of the pan servos !

Cuong there has to be an additional part that you got that you have to stick into the second cable from the pan servo. Its a resistor, dont you have any addtional part that looks like the thing Jeff has plugged into the second cable from the pan servo ? Boris

fang mal mit den 11ern an. Kenne ich garnicht hast du einen Link zu den Motoren ? Lg Boris

Hmm kosten technisch würde ich mit dem eprops anfangen falls was passiert wird es nicht so teuer. Was für Motoren hast du drauf ?

FW passt, kein Problem gerne ! Boris

Cool Jeff, i thought something was missing !

Dont worry matjaz or lanzer will take a look at it tomorrow any you will know what the problem is. If no one else that has the 3 axis or the 360 upgrade answer before i will take care that you get an answer Boris

Cuong, if you dont find anything and dont get it to work make a picture of the top servos and the top plate and i will direct the kopterworx guys to the thread tomorrow its a matter of seconds for them to know what not correct and they will help you ! Boris

Or they send you a wrong servo for the pan axis that is also possible. Boris

Coung thats the problem. You have 3 servos ! 2 Servos have two cable coming out looking like this : Than you have 1 servo were only one cable is coming out, the cable that i am pointing my finger to is not present in that one servo. You have to mount the 2 servos with the two cable...

Ah okay how i understand it you dont need a potentiometer for the top servos for panning. Okay check your servos, do they all servos have two servo cable coming out of them or are there two that have two cable coming out and one that only has on cable coming out ? Boris

Did you assembel the CS gimbal or did it come assembled ? Boris

Coung, your upper servo keeps on rolling because it is not connected to a Potentiometer tell it which position it is in. The Cable from the servo for the poti is hanging unconnected in the video. I dont have the 360 upgrade to my CS gimbal. But isnt there another potentiometer liek the blue...

before you take it out for the next spin please state excatly what weight it had and which props you had on ! And tell us what the behavior was. Boris

David get your quad as light as possible, totally forget about using 3s with the axis pop one of your 4s lipos on it and test it again. If you fly 3s your are up to 80%+ throllte to hover I understand the behavior you are experiencing after some time even when using 4s you voltage drops thus...

Are you flying inside or outside ?

David stick with the 13 inch looking at ecalc with the 12 4.5 your in the throttle range of 80% to hover that to much. Good is around 50% or under. Or am I misunderstanding you somewhere on the way. Your test were it dosent take off are already with the full 3400 grams ?

Ah okay you are making one special V12 version.

japp really nice keep us posted ! You have six motor connection in one boom and two small ones I guess the reason is for a X setup and for LEDs ? Than again centerplate only three motor plugs ? Boris