Search results

Whats the AUW. I can then have a guess.

I too am using the Tx timer and not the PMU. The more weight I can shed the more I can put into the camera stuff. I grade the batteries as they are not all the same capacity. I must get some Thunder Power or Hyperion 45C. These Zippy's are ok for the money But! I power the camera mount and the...

Gunter I am impressed with your new bird. Be interested to know what duration you are getting.

Looks like you guys were having far too much fun. I think we should have an international meet in Cyprus. Bring the family and all that.

James Thats a great achievement

Jake Only that Red Bull gives you wings and Yellow Cow gives you flings. Cyprus the Island of Love- some say, others tell the truth. More like sex on the beach I would say.

Nice to see you entering the spirit of things. if not the contest!!!

I tried again to see how fast I could get all five in after some practice. Now under 1 min. Tip- make model lighter and bottle heavier and Keep model facing into wind, drop down when the weight swings backwards not when overhead. A little constant wind helps.

What ever turns you on Bart!!! Must be all that cold weather you guys get.

Here's one I did earlier. Only my third flight with the Wookong but it was good enough to complete the job in about three mins. No practice. Just shows how stable the wookong is although I need to dial out some stick sensitivity. I decided to take off the normal camera to save some weight and I...

I had a similar problem until the controller sees where level hover power is in relation to 50% power and then it steadies down to a normal response.

Are you sure that the servo was not stalled? I would never power the camera mount through the imu They do not recommend it. Only use the ground and the signal wires. If your camera mount stalls it will crash your model.

I think that is what it is supposed to do!

Everyone holding out until the last min!!!

I thought the latest Xaircraft looked pretty good as far as stabilisation goes. I was even thinking about getting one. Are there still some problems?

I used cheap Hi-Model 30 Amp ESC's on one of my heavy lift quads with 3538 motors swinging 14x4.7 props. No problems with stabilisation straight out of the box. I did try inflight adjustments but ended up with stock settings. The only thing that I do see is a slight drop off in performance as...

I had two CC boards one was virtually dead on arrival direct from Dankers and the other one never reached the level of my current imu stuff which now includes Wookong M which is understandably far better. I just think that it is a shame that there is no after sales service for this product. If...

Setting the failsafe should be at about 15% but you also have to set your 3 position mode switch channel to span to output to hit the highlighted failsafe rage. Otherwise your failsafe will not work. You can test it by switching off the Tx and watching the modes bar.

I also tried Savox, beautifully made but the ones that I tried did not have good resolution. One thing that also springs to mind is that many radios do not transmit a high resolution signal outside of the four main primary control sticks. The MZ 14 for example only can use digital servos on the...

Out of interest I did try the CC as a stand alone camera IMU. It did not measure up to the tests that I have done against the DJI. Sadly the CC board fell apart with apparently no repair service to fix it.