Search results

I would like to add LED strips to my 450. should I just solder the voltage regulator directly to the power pads and run off of that? is anybody doing it differently? Sent from my iPhone using Tapatalk

I'm almost ready to fly my first build (450) and would like to have the multirotors battery voltage show on my radio. I am using a taranis frsky radio Can anyone tell me what I need to purchase to make that happen? Sent from my iPhone using Tapatalk

I have a free set, but they definitely seem to light of a gauge. I just lopped off the deans connector on one, and alligator clips on the i charger cables (that came with it) and everything seems to be beefy enough. Sent from my iPhone using Tapatalk

Ahahahaha! I bought one of those too, just doesn't have an xt 60 on it. It does have a deans connector attached to 14ga wire (seems kinda light) Can I just replace the deans? Seems like a dumb question, but I'm worried that the wire gauge is too thin, but if it was fine for the deans... I...

So if I have XT60 connectors, I guess I have to cut off the leads and solder one on? Or do I not mess with that and buy banana to xt60 leads? Sent from my iPhone using Tapatalk

Something kinda basic for balance charging... Can I charge with just the balance lead connected, or do I need to charge it with both the balance and main leads? Sorry, it's not mentioned in the manual :) Sent from my iPhone using Tapatalk

Just got mine. Looking to make sure I set up my first charge correctly. Anyone using the 106b? Sent from my iPhone using Tapatalk

I use Phoenix and it's pretty awesome. Sent from my iPhone using Tapatalk

4. Like a post it note showing what the switches do. Kinda dumb question, but I'm sure some have done this in a clever fashion... 5. Yes Sir -- I have the red strap, but it's kinda weenie. 6. hmmmm -- still don't know what it is :). What are you actually tuning when you tune them?

Thanks Captain Justice. I'd imagine that most settings look something like: 6/3/-9. I'll get all scientific before I fly it. We just got a shart-ton of snow, so looks like I'll have some time to fiddle with stuff before I go flying. SO PUMPED - the radio is actually communicating with the...

Hi Bart, In Vid 7 you mentioned that you were going to come back to the X,Y & Z axis measurements for the flight controller. Can anyone elaborate on what that means and the measurements I need to take for the entries? Do I use a ruler, or should I use something super precise like a micrometer...

Thanks again! I found this helpful too: http://www.youtube.com/watch?v=-gA5o_g4oW4 guess there's more than one way to skin a cat with the taranis!

Just a cool little trick that I learned when selecting the switch for the source: Once you've hit "enter" for the switch source -- and the source is selectable -- you can just toggle the switch you want to use and the tx will pick it up dynamically. Give it a try, very cool!

Thanks gringers! Sent from my iPhone using Tapatalk

Here were the questions I had: I didn't want to gum up the group build thread, but it pertains to bart's suggestion to start off simple and get flying in manual mode. I didn't post there because I'm sure there are hundreds of variables with RX/TX options, so just figured I'd wave a flag here...

Hi Bart, where did video 7 go? can you put on the first post with the others? Also, had a question for you when setting up the basic functions. Do you just set up channels 1,2,3,4,7 skipping 5,6? I assume that you'd need the basic 4, but then how does the naza know to stay in manual mode?

Thanks Gringers, I'm part of the group build and want to set up just the basic features to get going in the manual mode. I had a few questions here: http://www.multirotorforums.com/showthread.php?17410-Taranis-FrSky-X8R-Naza-2-setup-questions-basic-manual-settings-questions&p=150353#post150353...

I didn't want to gum up the group build thread, but it pertains to bart's suggestion to start off simple and get flying in manual mode. I didn't post there because I'm sure there are hundreds of variables with RX/TX options, so just figured I'd wave a flag here for anyone familiar with the...

So got my first LiPo today. Can I set up the naza with the voltage around 15.2v? Also, guess I gotta change these banana plugs out with an xt60 connection! Sent from my iPhone using Tapatalk

What a great post. Thank you, Bart. Sent from my iPhone using Tapatalk