Search results

In that case I can't help you and sorry for misunderstanding...

On my quad have ubec but take it off because no place in my quad. Fly about 30 hours with no problem. But yes it is good thing if you have some room to place it.

Yes with that weight I will go for 4S and at least 4400mAh for deasent time flight.

...also read somewhere from some expert guy said about length of additional power wire, if you want parallel or serial, it matters max 3 inc (7cm) long wire per battery in other way will kill ESC over time. here is the link. I hope that is legal if I place link from another forum treat: link

Before figure out have a little fire alarm in my house, because wrong wiring 2 battery (balancer wire serial, power parallel). So here is a couple images that show how to wire parallel. Be careful. Also here is the link with all different ways of battery wiring...

Hi Zzr, Have GAUI 500X also and fly with Zippy 4S 5000mAh 40C with no problem for about 12 min with total weight 2.2kg. On Tomstoy2 suggestion I replace all 4 default GAUI motors and ESC and put T-motors MT2216-12 800KV and 30A ESC. Now they are barely hot (55-60 degree) after 45 min of constant...

yes.

Did you restart WKM with new setting?

As I said here is video that in my case live video recording is working on little 7 inc monitor. Here I bought video converter: http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=350484260729&ssPageName=ADME:L:OC:US:3160 and monitor the cheap one...

Hi there, Will upload my little video demonstration that live recording in my case work. Really nothing special, just plug and wire everything together, turn on stuff and watch on 7'inc what I'm shooting (live recording). Just give me an hour or two.

Hi folks, Have motors and esc for sale. Why? Very short story why I selling these motors and ESC. Buy GAUI 500X complete kit and crash, because of bad power solder. Buy another kit and notice with several 4min test, that is not suitable for my total weight (2.1Kg) and buy stronger T-motors...

Maybe off topic,but I like to know what is the normal working temp for brushless motors and Tiger 30A ESC.

Where exactly you plug servo jack on Futaba Tx? If so which port? Thanks.

Have the same video converter and it work great with my GH2 with no issue at all.

Yes I notice that too when setup my octo. It scare me out when press default on assist software on firmware update. On my luck take off props before do software adjustments...

Thanks to clear that out, because if you include/select wrong number in my case payload varies by almost kilogram.