Search results

I'll try the transmitter adjustment. For now, I can't really get new motors and props until I get some more cash. That being said. Things seemed to be a little better with a 4s.

It raises and keeps going, If don't pull back on the throttle it will just keep getting higher. When I switch back into manual it will drop. If I don't catch the throttle it will just keep dropping and hit the ground. I'll try and post a vid. I'm not sure the barro is bad as it worked better...

Well, the Spektrum 3010s are not so great.

Ok, I just tried the dual packs 2 X 3s 5000mAh batters. I get longer runtime; 15 minutes. But the sudden ascent is still occurring in fact it seems to be the same or maybe even a little worse. The sudden drop after going back into manual is definitely worse due to the extra weight. Yesterday I...

That's good to know cause I was thinking about the 65s. I've heard good things about the HYPERION DS11-SCB. The creator of the gimbal tested the gimbal using these and spoke fondly of them.

That's not too bad. So you are using the SH 0255mg digital servos eh. There is a little bounce, is that coming from the Hex or the gimbal? PS. what are you using under the cam for vib isolation? PSS. Are your servos plugged into your board directly? or are you using a bec? I was looking at the...

This video was on the site from ware the gimbal can be purchased. https://vimeo.com/36924851# The claim the camera stabilizer was tested with HYPERION DS11-SCB, EMAX ES08MD servos. This GoPro mount works fine with MultiWii fly controller.[/EMAX servos you can buy in their shop here.

Ya, that video of yours looks pretty similar to my issue. I was hopping that bumping up the voltage with the BEC would have helped. I've read a fare bit about the HS65MGs but I was wondering if there is something smoother and better in that size.

Hi again kloner, I need to use the sub-micro size servo as this is the only size that will fit my gimbal. I'm using this gimbal from quadframe. Presently I have the Spektrum 3010s, a sub micro digital servo, I choose the spektrum because I heard that Savox makes them and they are basically the...

I think I can see what's happening. When I apply 6v with my BEC to the Spektrum 3010s I get serious jitters, like back and forth kind of stuff. However when I was just using the power from the Naza it's self I may not of had jitters. The vibrations I saw might have been individual tooth...

That's not comforting. How low is low gains?

Hi Stacky, Were your servos micro? With my little gimbal I can only take micro servos.

Ok, tried using a BEC @6V, the Castle Creations BEC and I made a harness for the servos like what is in the diagram at the following link. http://www.multirotorforums.com/vbulletin/attachment.php?attachmentid=7382&d=1344271049 The Jitters were much, Much worse and violent. I'm using the Spektrum...

Latest areal vid from the Hexacopter "Explorocam 2" This was filmed on Wolfe Island near Kingston Ontario. I didn't do anything too crazy because this was my first FPV with the DJI F550.

I watched a video where the guy toggled the IOC switch a few times prior to take off. One set of toggles did heading Lock and some other set of toggles did Home Lock. I just thought the Naza recorded where it was taking off from automatically. I guess this is not the case. Can someone help me...

I'm wondering the same thing as you, can I use 10" props with 4s Graupners. I'm really new to the DJI stuff, so here it goes with my very, VERY limited experience. Since I put 10x5 Graupners on my F550 it is now so lite for the props that it suddenly ascends when I switch into Attitude/GPS...

Ok, Did it. for the switch for Manual, Attitude & GPS [Manual = no light, Attitude = Yellow flashing, GPS = green flashing] Switch for IO, no lights what so ever. But the software says the switch is being toggled.:dejection: So basically, no lights for IOC, when I start I get a bunch of red...

I'll have to check. Will I need to fly it to check or can I keep it on the ground. It's kind of raining here and it's dark.

I did calibrate my compass. Switched between manual and GPS lock about 10 times waited for the light and then rotated the Hex 360, when the light changed colour I tilted the Hex vertical and rotated again for 360, after the light went out. Plus, it holds in GPS mode. I may not have rotated in...

New question; IO You guys have been a huge help on this topic. Any idea why my "intelligent Orientation" isn't working? The switch is responding in the Naza software and showing that's it's working. But when I'm in flight nothing happens when I switch between the different mods. The software...