Search results

If any of you guys like diagrams then you may enjoy this. It is a screendump from the Castle Creations Phoenix ICE 50 Lite data log. From the last part of the payload video. By the way, AXI 2814/22 is a 14 pole motor - correct? (the pole count is a necessary input to the data log software to...

@jrlederer I am using a "hybrid" power distribution board. This board:http://store.jdrones.com/product_p/hexapdpcb1.htm And I have soldered 8 AWG wire on it. The hover current in my system (at 7.5kg AUW) is ~72A with peak current at 240 A, and it seems to cope fine with that. After some initial...

Hi guys, I have been playing around with my CarbonCore octa 1000 and an icecream box filled with sand. Yes - it is a payload test. The camera mount is a Mega radius 3 axis. Check it out at youtube: Cheers / Tomas

Agree. Get well soon, George!

Thanks Vislaw. Will check it up :)

Anybody to give a recommendation on suitable laptop / notepad (with touch screen) for ground station usage?

Hi guys. I am striving to tune a WKM on a 100cm octa and I have made some progress, but I am not done with it yet. First, I agree with the guy who said that SF props are not a good friend of WKM. True! I started out with APC 14*4,7 SF and found it impossible to find a sweet spot in WKM auto...

Well I bought the 2,4 GHz link a few weeks ago. Just got the s/n to activate.What a perfect timing! Not :(

Jochen, yes I experience the same problem with horizon leaning during accelerations, and it is quite annoying during landscape video traverses. Kind of ruins a take that was otherwise perfect. I would really like to se a working solution to this. I know George has designed a G-sensing logic into...

Thanks for input voltage advice, George. Previously, I had it running on 7,5V but a couple of days ago I raised it to 8,4 to allow the same supply to also power a Sony cam, making the latter independent of its tiny battery. This turned out to be very practical, indeed. But today, after several...

Is 8.4V ok for Picloc 3X Pro? Maybe the specs are to be found somewhere in Rotorpics website, but when looking there a moment ago I could not find it... -edit Ok ok.... search first, and then ask :shame: Some post here said 9v is maximum and another one said 8,4v. Still, where is the official...

Tomstoy, what specific seismic app do you recommend? Im on Android. Thanks :)

Totally amazing. Dogs might get really disturbed by the presence of the rotor cat.

Yes, maybe I should consider the Xoar. I see they make 14x5 woodies. Anybody using them? Verdict? Also I am considering moving from 14x5 (actually 14x4,7SF) to 13x6,5 if that will give me better control response on the WKM. Though, it would be sooo nice to know if anyone have hands on experience...

Were to buy Graupner MR props? I am trying to get a heavy octa (now 5kg, but later 7,5kg with payload) up and running on a WKM fw 5.06, CC Ice 50 esc (fw4.01), APC 14x4,7SF. So far the results are slightly disappointing. When rate gains are increased to have nice hover stability, it gets...

My name is Tomas and I have been following for a while. :) I have been into AP for some years, as a side business to my main profession. I have mostly been doing stills, but also some panoramas and videos. The results I have produced so far are decent, and sometimes quite satisfying. But I am...

3X Pro Bug reports Hi George, I have updated to the latest FW (2012_04_29_P3X_v56_76_PRO_X1) and Toolz software, and I made the Factory reset. The Picloc 3X Pro is mounted on a PS1 VR360 3X on tilt axis (under slung on Maxi Joker 2). Although I know you have worked hard and released numerous...

Hi, Eagletree Systems have a fairly reliable solution in the Seagull and Electric Expander including their hall element toroid current sensor. Data is transmitted with the telemetry transmitter. Alternative solution is their eLogger with built on current sensor. It can feed their osd pro with...

About Spectrum RX orange led; I think the behaviour may have changed slightly through the years. I suggest read up on relevant instruction manual - are you certain the flashing is not due to brown-out? (now that would explain a lot, wouldn't you say). Late RX also have a red LED on the msin RX...