Search results

Me too. Autopano! Autopano! Autopano! :nevreness:

Sorry to hear about your losses, Denny! And TWO of them in one day... well, it double sucks. Care to provide some info on the F1-535 event? Yesterday I submitted a short report to DJI support, using their web contact form. I referred to this forum for more details.

Man, that´s really baaad! :upset:

I am increasingly convinced that there is a bug in 5.12 for octa, causing glitches in motor 7 & 8 control. ESC: Castle Creation Phoenix ICE50 fw4.01 (has worked trouble-free with fw 5.08) (This has NOTHING to do with the power-on beeps from the CC ESC, they are normal). The motor twitching is...

Hi Droider, Yes, initially I got the config error in the assistant. But as I went through all the tabs, calibrated and reconfigured (clicked "write") and finally turned it off/on, the config error was gone. All seemed ok, except for those short motor bursts. I would be very interested to know...

FW 5.12 for octa SAFETY ALERT I have just upgraded WKM firmware from 5.08 to 5.12. Octacopter "I", batt: 4S, ESC: CC Phoenix ICE 50 fw4.01 (set for MR, outrunner) "Old" type WKM controller (december 2011) After upgrading the fw I went through all tabs and reset /wrote the settings, new TX...

Rule #1a with the problem you describe: Remove bullet connectors between all esc and motors, just solder the cables together. That is if you still had bullet connectors, of course...:) Many types of connectors loose their tightness after some time of being constantly connected and that really...

Wow thanks man! With your dropbox link I had it downloaded in two seconds. :frog:

The DJI server seems totally jammed. I cannot even download the Wookong-M User Manual v3.0. Always getting "Network error" before download can complete. Can anybody provide a copy, please? Thanks

Respect! Goood job.

Hilarious :D

Endurance test CarbonCore octa1000 + Mega Radius Battery: Turnigy Nanotech 35C, 4S 6000mAh*4 = 24000 mAh By mounting an extra pair of batteries on the side wall plates I can put together 24Ah. AUW, including 800gr camera, was 8.5kg I had it GPS hovering at 40m height, slightly turbulent...

Maybe that´s how it is Boris. But as I understand it, the now MR compatible firmware from Castle Creations (currently 4.01) more or less removed that filter from the pwm input. So I am still concerned, albeit using CC esc. / Tomas

Boris, I certainly hope very much that the DJI engineer finds a more clever way that does not require more virtual or physical channels. Instead these modes could be included on the same channel as IOC (X2), (X3) or Control Mode (U). Simply by dividing the pulse width into more bands, each one...

Castle Creation users: (and this is probably valid for other ESCs as well) As I have been performing some payload tests with my octa with CC esc I have been monitoring the internal temperatures of two of the esc onboard (Phoenix ICE has data logging feature), and the temps was never higher than...

@monwyhunster Maybe you should double check your failsafe settings (in the assistant software)? So you have not accidently choosen the just "hover" option... Pitch and fall sounds like a power train issue.

So, are the WKM ESC and MC issues interrelated? (I am using CC PhoenixICE50, mounted under the motors...) Bill, I am interested in what info you can share on this. / Tomas

Bulletin quote "We are in the process of a voluntary replacement of WKM MC manufactured before January 31 to all S-800 owners." I did not buy a S-800 but I bought a WKM, end of december 2011. Used on an octa, ESCs mounted under each motor. - Where does that leave me in this?? :upset:

Ouch :what: Thanks for the heads up!

Hey, what? So now there are NEW and OLD WKM:s. What is the implication for other than S800 users? I use my WKM with Castle Creations Phoenix ICE 50 on an octa. Preliminary test flights are promising. Now, should I be worried? Are OLD WKM:s BAD WKM:s? :upset: / Tomas