Search results

I prefer a Futaba T8FG Super (heli version) myself.

Setup of the HFP is pretty basic but it works! I adjusted the gain and it was back to flying great. There's a gain setting for flight and a gain setting for altitude hold, and that's pretty much it. And you can adjust those from the transmitter. There isn't a COG setting. There are a few...

I gave it a quick test when the rain stopped for a moment. Lowering the gain seems to have fixed it. I'll have more info when I give it a proper test on Friday when we'll finally have decent weather. Nic, I'll be sure to check temps as well. For the cameras we'll be lifting we probably would've...

Looks like fun!

Thanks for all the help Nic. I'll give it another go soon. all the best, Ben

Start with something small so you can learn how to fly first. A Blade MQX is how I got started. Good luck!

Got any pics? I hope to build an X8 down the road.

If you're careful with what you buy, you can build a fun little quad without spending a fortune. And I bet you get a discount on those batteries :)

You can chose whether your entry is the All Up Weight (incl. Drive) or the chosen Components (Battery, ESC, Motor) weight will be added to your entry (without Drive).

Looks stellar. Love how you finished it off with the vinyl.

Kloner beat me to it - check out Progressive RC.

I'm not familiar with your charger but I have parallel charged batteries before. Something to be careful about: You want the packs to be in relatively the same state of charge that you're charging (similar starting voltage). You'll also want to connect the main leads first, then the balance...

Nic should be on the payroll.

Looks like it was a gains issue. I haven't fully tested it, but based off of a quick test on my front porch (it's raining here) that seems to have fixed it. I'll report back when the sun comes out. THANKS FOR THE HELP! You guys rock!

I'll try that when the rain stops. I messed with the gain a bit, but I'll dive into that a bit more. The oscillation is pretty violent though.

I checked the prop balance and they're darn near perfect, so that isn't it.

I've run into a strange problem with our XM6. A few days ago it was flying great. Then I finally put the AV200 gimbal on it. Now it is oscillating and vibrating badly. I pulled the gimbal off and it flew fine. I put the gimbal back on - problems. I tried adding some weight to the gimbal to...

Looking forward to seeing the results of the tri blade vs. twin blade.

Great work, Scott (Capo Creative). Really showed off the course well and in a unique way.

I modified our XM6 to use a battery tray from a Cinestar 8. I needed the option to use our Maxamps 11000 batteries and they're too big to use two at a time. Soooo out came the drill as seen in the pic. Absolutely loving this XM6 - a fun copter to fly.