Search results

I got the chance to try it today and.......flip!! changed gps puck direction and changed the IMU direction in assistant software calibrated compass and Boom!! the bird flipped as soon as the throttle was over %50. I don't know what is damaged yet beside 4 props and the landing gear and maybe tow...

I don't have A2 but I guess you should set it up as WKM, meaning you insert 100% for lower motors and 95% for upper ones. You can take off all props and test it with 0 values for all motors and see if motors rotate, then test above values.

In mapping field, the possibility of lidar mapping with multirotor will grow and become much easier because of new light and higher capacity Lipos from maxamps and gensace and new and light Mobile Laser scanners.

Looking forward to your feed back. I have time to fly only on fridays and last friday it was raining. May be this friday I can test it.

No gimbal. I'm planning to use this setup for mapping without gimbal. 15.43 lbs includes the copter, a sony NEX7 (no gimbal) and a gopro including h3-2d mount and 2x 11 amps batteries. About custom mixing this may help http://www.rcgroups.com/forums/showthread.php?t=2133373&page=17

I have almost the same setup. X8 , U5 , 40 Amp T-ESC, 15" props, WKM, 2x 11 amps lipos. AUW 7128g (15.43 lbs). I have not maiden yet but I hope for at least 20 mins flight time. I have configured custom motor mix so that upper motors run 10% slower than lower motors. I heard somewhere that it...

COG is dead center and IMU and GPS are located exactly on zero point of X and Y axis, I think this will work. I'll give it a try on friday.

I guess CSC (Combination Stick Commands) won't work if I reverse pitch and roll. I'll try every possibility on friday on flying field and gice you feedback.

Since the purpose is to fly waypoints, I don't think IOC would help.

Thanks Carapau. Somehow this is the best way of placement of cameras for my particular use right now. Vulcan flat X8. 15'' props. batteries bellow center plate, electronics over the center plate. To avoid having props on the picture I have mounted cameras a little bit further from the center...

Hard to explain but I'll try. I have a X8. A gopro is mounted on front side (nose direction) facing forward and a Sony Nex on the back side, facing backward. What I like to do is to change the nose direction of the multi every time I want to use each of these cameras. So that when I record via...

yes, that would be really useful

Solved and closed. Tested in real mode and every thing works perfect. I've not found out yet why it malfunctions in simulation mode but as long as it performs the task in real mode its OK.

My experience is that heading effects the time the UAV holds at each waypoint. At the moment the UAV leaves each waypoint it should face forward to the next waypoint. But for me it totally ignores heading on the waypoint and when it leaves the waypoint it chooses a random heading not facing the...

PC Gs v.4.10 WKM I had no problem to setup waypoints and specify way point heading degrees until today (both in simulated and real mode). Every thing worked well. But today I planned a mission and configured waypoint headings in some degree and started the mission in simulated mode. The aircraft...

Thanks Tahoe Ed. I would do so.

I know it acts like a USB Storage Device. I think it does not record or store log files at all. There is no file in its folder (when I open it as a USB storage device) except sys.dji file. I have 4 other IOSDs and all of them are recording and showing log files. This one was also functioning...

Thank you. I reflashed the firmware and power cycled. No improvement. I reviewed the manual and DJI Wiki page, found nothing reg. storage mode.

No one?

One of my IOSD Mark II is not recording any flight log file. This started after I deleted all previous log files. Now after many fights all I see in the IOSDLOG folder is a hidden sys.dji file. Any suggestions?