Search results

got the response now i went back to firmware 1.22 and it works fine however stuff is still acting weird yaw is going off on its own the flight mode switch is not responding etc etc.. wouldnt mind speaking with someone that has done this mod . i think im close, really close

actually a wire was in the wrong port.. so dumbbb! im fried though from working.. now i am not getting any rudder,elevator,aileron response only throttle... and the ahrs is blinking red at a certain rpm and randomly from vibration. need to figure out how to mount it...

got everything setup except im getting one motor spinning randomly and the rest respond normally any solutions? is it a bad esc? thats what i have read thus far!

I always disable the download feature on everything i post. thank you for the comments.

yeah i sent it last night using vimeo as well as email! that would be amazing , i have put so much time and money into this, obviously not like some of you. but i just started doing this in january2010!

here is a little flick I threw together this is filmed with the xaircraft x650 stock little modifed xaircraft camera mount with Zero stabilization all gopro currently building a x650 x8 with downlink, and 3xpt similiar mount , with t2i should be up next week!

http://shop.quadrocopter.us/Parts-Spares_c_33.html

So ive heard I may be the only one really having extremely positive experiences with XA, I am ready on a whim to purchase a droidworx or MK , just like i did a month ago with the trex 700 and 2xpt etc etc and learned i couldnt fly it and had to sell for a 500 dollar loss. I am still shooting...

So im going back to the multirotors, ive been flying a 450 size heli for the last month and i have a trex 700e with a photoshipone 2xpt sitting in my living roomthe whole time, the goal was to get this in the air right around now and i am just done , so selling it, and starting my upgrade to the...

Can I run one different brushless motor with 3 stock xaircraft motors. any recomendations brands. dont really want to spend a fortune on it.. everyones is out a week on motors for the stock xaicraft.. I have a few jobs i have to get the heli back up!

I found these handy devices and thought instead of going through any more trouble trying to get my 7d live view while someone remotely controls the gimble and I fly the heli.. skip the wiring http://www.proviewsite.com/index.html or...

wanted to do one last shoot with the x650 just finished assembling a trex700e with a photoshione mount should have it all up and running in a week. just doing wiring now http://vimeo.com/24405695

it works perfect, I will post some pics tonight if i can. all i did was took four extra booms zip tied them accordingly , so that its balanced and removed the battery tray and zip tied that to the rear boom and put the velcro back on. and then just make sure everything is balanced . i cant...

its a blue lipo and it has been well taken care of. i checked voltage on it and everything seemed fine. you think i should just scrap it. it was 15 dollars

today i plugged my battery into the x650 and turned on my radio and everything connected and I slowly powered motors up and let it idle for 15 seconds and out of nowhere it just shut down and the ahrs was blinking red.the fan even stopped. then rebooted after 2 seconds, I tryed it again with a...

I have been researching the crap out of all these. but the issue still stands cmos or ccd and with the very slight vibrations fromt he heli I dont want any warping etc. or too slow frame rate. not too worried about pictures its the video.. I was kinda looking for someone on here thats used one...

was going to go with the nex 5 but i think the weight will be a issue. any sugesstions other than the gopro for a hd cam the x650 can lift. theres alot of choices out there. s95 nex 5 nex 3 lx5 lx3 some ccd and some are cmos

so here is the footage from the quad with the photoshipone style mount i rigged on a x650. I havent really shot any video since Ive bought this thing because its been to shaky. This footage is not stabilized at all and the xaircraft 1 axis camera mount isnt even hooked up. the best ive...

ok so ill post up the video from today, its rainy outside so i just flew it in my buddies shop and it came out soo steady, absolutley insane. I highly recomend doing this mod if your looking for better less shake video! I can in detail explain what i did!

had to change something. not happy with images coming out of the normal setup