Search results

The actual build is finished now, all what is left is attaching the booms, some LiPo's and good nerves for the maiden flight. This won't happen before the next couple of weeks, since the Kratos will go straight into my container, heading South Africa. As a conclusion I can say that the Kratos...

It's about time to finish the buil-thread....have been busy lately. Next step was to attach the ESC's to the ESC-plate, attach the top main plate and implant the YS-X6 and the receiver......basically some "reverse engineering..."

Don't you worry....the main thing are crash-free flights. Same story as with the ladies....some look stunning, but are rather useless :tennis: Chris

Hi Louis I got the antennas from the Zen in a 90° angle, but it's hard to see on most of the pictures. Here you can see it: Chris

In general it doesn't matter what receiver / transmitter you are using....with most ESC's it is the same procedure. I do it always by connecting the ESC directly to the throttel channel on the receiver...one by one. Only then I connect them to the Naza/Wookong and do the stick calibration in...

Check this vid : Naza and WooKong will start to puke in that wind...... Philippe Neidhard, one of the European distributors, is standing fully behind this product and is an active member on our Forum. A great guy to deal with, would answer emails and questions very fast. Try that with...

The main figure we are interested is the KP-index......here it's always up-to-date: http://www.swpc.noaa.gov/rt_plots/kp_3d.html http://sunearthday.gsfc.nasa.gov/swac/tutorials/mag_kp.php Green bars = everything OK Orange and red bars = I don't fly Chris

Hi Lois I am really glad that all went well.....looked like you S800 didn't let you down. Just one word of warning: NEVER EVER fly that close to your kid or in low altitude towards your position. If anything goes wrong, you got not even one second to decide what to do next to rcover your...

Check here: http://dronespecialist.nl/t-motor-gf-mn3110-15-780kv-mit-60cm-kabel Chris

Hello I have no experience at all with OP, but followed this thread from the beginning......it seems to me that all developers which have been banned are intelligent, skilled and very nice people. Reading the way osnwt has been treated, down to the lowest with involving his family, leaves a big...

Hi Mario I have to officially complain......why is there no infos about the landing gear in this thread which I saw on Facebook........:02.47-tranquillity: Chris PS: Build thread will be finished this week....I promise

heheheheh....that's the wildest soldering I ever saw....but if it works, who really cares ??? I hope you checkt if the soldering is solid..... Chris

Hi Chris As long as you can let us know that you are fine....even if it's from your wifes computer :tennis: Chris

Since we all know, you are also in this business as a pro......would be great to hear from a few guys like you about how they went into business and what their experience was to "make it".... Chris

I am also not sure about the frame being a multi-layer circuit-board, but it's impossible to find out without sanding the plate down micron by micron. I suspect it's a single-layer board, since there is enough space and manufacturing double-layer boards is a lot more expensive. Looking at the...

This is what I would do: stick some cello-tape over the drilled hole and the circuit (bottom side), than fill in some good epoxy from the top-side into the hole and let it cure. Pull the cello-tape off and your bottom-side will be even and repaired. On the thin broken circuit lane you could get...

Lucky you, I still have one old top-plate in my workshop....so I just sanded it down arround the area where you drilled a hole: I hope this helps.... Chris

Absolutely great post....100 % agree with you. Because it is not that easy and a lot more involved than a good GPS-hold, it will also make sure that a dedicated and focused person can make his way to success.....even if the copters become more and more Plug'n Play. The copters are just an...

I am really very critical against DJI, but the fact that lot's of crash-reports related to GPS are somehow "concentrated", meaning that for a week there is almost no crashes, and than within a day or two we can read reports about GPS failures, crashes or fly-aways almost every hour made me...

Not a bad idea....but you would have to do a little dis-assembling since the circuit lanes are are on the bottom side of the top - plate. Just take the bottom-plate off, and with tilting the bottom side of the top-plate in the light you will see where the circuit lanes are running. When...