Search results

Could this be the start of self powered MR aircraft??? http://www.zmescience.com/research/studies/solar-paint-promises-to-turn-any-surface-into-a-solar-cell/ Ross

Thanks Jes, my German is none existent :) :) Ross

Thats one tall order for 10,000 euros!!!!! The mount is going to be your hard part....good luck with that one! I have an SJ8 running 2820/07 motors & 60A ESC's, with MK flight gear. From 2 x 4000ma 4S lipos I get 5 mins tops. With 4 x 4000ma 4S lipos I get...yep, 10 mins. So if I read you...

I 2nd Rob's comments above, you ask & he gets...simples. Ross

Hi guys, this anyone know of a stockist in the yUK that sells 5mm thick CF sheet? Ross

Ray, try going to www.fpvlab.com & you will find a wealth of info on there. Ross

Yep the ADX3 does offer redundancy, as do all octo's. I cant advise what one is right for you, but if you want safety, then either one of those 2 I have mentioned would be fine. I chose a Droidworx SJ8 for the same reason & have never looked back. I have found from watching YT videos that the...

Lucky escape for the electronics to survive. Droidworx make a carbon fibre sheild as such to go over the top of the dome on thier SJ6's & SJ8's, you could get them to fit over yours! Ross

Check out under my avatar, somewhere around <<<< HERE :) Ross

No worries, as I said in the PM..we all start at the begining! Its quite mind numbing to start with & then something clicks....& you wonder what all the hassle was about ;) Where are you from Dom? Ross

OH Dear!!!!!or words similar to that effect!!!! Thats a bad one, are all the electronics ok? Ross

My 8 motors draw 328A when flat out & not had any problems with my blank PCB. The wire from mlipo to power board is 10SWG & from power board to ESC is 12SWG. Ross

No worries Dom, I went away & quickly sketched it out in photoshop, edited my post & noticed you had replied...so take another look above ;) Ross

Hi Dom, I made mine from blank PCB (bought from Maplins). I then used a compass to mark out 2 circles & chipped away with a scalpel the gap between inner & outer rings. http://www.multirotorforums.com/album.php?albumid=24&attachmentid=2835 Basically like this:- Ross

You need to log into hobbyking & do a live chat, ask when they are dispatching your order & it will ship within 24 hours. I found this to be so common, that every order so far this year I have had to live chat support & kick some butt!!! I dont use BL's because I know they were 1) Far too...

Hi Boris, but I bet MK would soon be on your back if you use thier setups for commercial gain :) Its not just MK, have you had any dealings with hobbyking? I bought an eagletree air expander but it was short on the pitot tube...in other words there wasnt a tube in the plastic bag! So I contacted...

Hi Lee, I can confirm that Geoff at quadcopters uk is the main man in my book. If he hasnt got it, he gets it in fast....he has my vote, no offence to other traders meant either. I like the idea of UK traders list to be honest, at least we wont have to pay customs charges or over the top...

Hi Ray, welcome fellow addict. Sounds like the route I came into this MR part of the RC hobby :) Ross (just down the road from you)

Jeff, whats the MBPS through put? I did see the GH1 at 144MBPS & 86MBPS, both very impressive. Ross

Now this is wicked, watch the sales of FPV gear go through the roof :)