Search results

  1. fltundra

    XAircraft Where should I mount the SuperX?!

    I would mount it on top...that's how i have mine. Wouldn't doubt it for sure.
  2. fltundra

    building/buying a 1600 USD multicopter for Videography !

    Your going to probably spend at least twice that......these things burn a hole in your wallet.
  3. fltundra

    LIPO voltages

    I use the Unisen-E with the Frsky lipo sensor. I like being able to compare my SuperX, Taranis, and Icharger logs, gives a nice picture of whats going on over time with my lipos.
  4. fltundra

    LIPO voltages

    If I used voltage only, at 3.6 volts I'd be way past the 80% mark. Generally my lowest cell is at 3.68-3.70 when I hit max MAH at an 18 amp draw. So 3.6 for me would probably put me at around 10% capacity left, or lower.
  5. fltundra

    LIPO voltages

    Get one of these...I have two, and you will always know where your at on MAH used. Unisens-E...
  6. fltundra

    Batteries

    Based on IR at any given time during the lifespan. http://www.soko-heli-tools.com/en/lipo-battery-calculator/lipo-battery-calculator.html
  7. fltundra

    Batteries

    Here are the IR readings for my Multistar 10AH4S,tests out currently at 14.1C.
  8. fltundra

    Batteries

    Multistar 10AH4S 10C only weighs 801g. 10AH6S 10C at 1189g
  9. fltundra

    Two 5,000 6S or one 10,000?

    You can now run 2 lipo sensors with the latest versions of OpenTX firmware. Picked up that bit of info it about a month ago over in the taranis thread.
  10. fltundra

    Batteries

    None! 15 flights so far.
  11. fltundra

    Batteries

    How big do you want? http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=64439
  12. fltundra

    XAircraft SuperX on heavy lifter

    Looks as though you nailed it! Very nice.
  13. fltundra

    Batteries

    Just an example of what the 10ah10C is capable of at current IR readings. http://www.soko-heli-tools.com/en/lipo-battery-calculator/lipo-battery-calculator.html
  14. fltundra

    Batteries

    OMG do i like my new Icharger, even better then my Cellpro. Both different features with +'s and -'s.
  15. fltundra

    Batteries

    Alot have been saying that the Multistars probably can't deliver the goods. Mine does, tests out at 14.1C. Means it can deliver 141 amps without damage.:tennis:
  16. fltundra

    What's the proper way to charge a 9000 mah battery

    Your killing them slowly discharging them to that low of voltage. My lipos end up at at around 3.68v under load at 80% discharge, 3.7-3.74 at rest.
  17. fltundra

    Batteries

    Picked up an Icharger. IR readings 10AH4S Multistar 10C. Continuous current [A]: 141.4 voltage drop per cell [V]: 0.424 total voltage drop [V]: 1.697 Continuous C rating: 14.1C
  18. fltundra

    What's the proper way to charge a 9000 mah battery

    Absolutly, I have the 10ah10c Multistar 4S and up until today i have been charging at .4 C with no problems.
Top