Search results

680mm

2,668 auw.

Good results so far with the 10AH4S Multistar 10C.

Please post some pics.:tennis:

I been flying it for a while at 1.0 on pitch and roll and .9 on hgt and yaw, but have the pot gain normaly in neg setting so i tried .9 and see an improvement. Thanks for responding so fast. :tennis:

Are talking lowering the gains to the point of eliminating the shakes in ground effect, or just reducing them to a minimum? I'm at .9 now on all four. http://www.xaircraft.cn/blackbox/report.htm#2014_08_10_093408.475_357.1.25.55

That's because rpm at hover is different then when climbing or descending. You need to balance each motor at hover rpm with the prop mounted. That's where the majority of vibs will be.... I use the Lazer and mirror on the wall trick after I've balanced my props on the durobro and top flite...

My 515's were loctited.

Have you looked at his inputs in the log? your aggressive definition is about 50% max stick movement, his are a 100%.

Having flown my SuperX for many hours, I can say I would never fly that aggressive in GPS mode. It's meant for slow fly and AP.

Why were you flying so aggressively in GPS mode?:confused: http://log.xaircraft.com/report.htm#2014_08_08_103531.750_48.1.02.59

Motor outputs way too low!, vibration issues, and motor alignment.

If you post your "Show Report" page, no one will see your location!:suspicion:

That's what i have always understood, 490hz is max.

Nice!

---

I would only go T-motor and nothing else, not worth the risk.:tennis: The 420 kv's have issues.

There has been multiple sync issues with those motors! The only ESC that works is T-motor. Check out Kloners posts.

http://www.ecalc.ch

I'm at 2515 auw with a 4S8000mah readymaderc at 62% hover with tiger 14 cf's 22min at 6300mah used. Even at 62% hover, the KDE's never go above 95% output on full throttle climbouts. Running same config , but with 6S 8000mah, at like 2949 auw she hovers at 48%. Tarot 15 cf's hover with the 4s at...