Search results

Need to have a bit of an equipment clear out as i'm beginning to amass a large amount of stuff which has either not been used at all, been opened only to find it's not what i needed or been used for a few minutes in a build which was subsequently shelved etc. Paypal payment please. Prices...

Could anyone who has their AV130/gimbal connected up to the gimbal outputs on their wkm please have a look at my diagram below and confirm that i've got the connections correct? Thanks…

This might be a daft question… Can the output from a receiver be split - using a Y servo lead? I've just bought a couple of THESE IOBoards from JDrones (and they arrived in no time at all). I plan to split the wkm flight mode channel from my receiver so both the wkm fc and this board are...

I'm wanting to persevere with my MT-3506 motors, but having timing issues with the flyfun 30a esc's i'm currently using. So, has anyone got some experience they can share with flashing esc's with the "wii-esc" code? I now have some hobbyking F-30A esc's, an AVR programmer and AVRStudio 6...

am i the only one who seems to have a rather tardy naza gps. seems to take forever to start getting a lock (2 red flashes). it will then sit there double flashing and i can only get it to drop to one red flash by taking off and gaining 20/30m altitude. there's plenty of sky to look at and...

A slightly half-cocked question, as i've just received my single waypoint kit - not been able to install the software, but have had a look at the pdf. Can anyone clarify how the on screen mapping works when you're 'in the field' without a wifi connection to the laptop? Will i need one of those...

just had chance to test the naza with the new gps doohicky, on my HT-FPV frame. generally it seems pretty good - i was up a hill, the wind was blowing, but it did a pretty good job of staying reasonably well put. i was also having general test of the HT-FPV as it's a new build. when flicking...

been preparing to install the ezUHF with my DX8. ezUHF requires 3.3v output voltage, i've just been testing mine. PROBLEM: the voltage starts off at circa 3v, which is ok i understand, but over the period of about 3 mins i can sit here and watch it drop away to less than 0.5v i'm...

I've got 4 x MT3506/25 650Kv motors up for grabs. This set has seen about 20mins of flight time - they were on a Naza project which i'm no longer using (Flamewheel frame up for grabs soon too) They fit the flamewheel frame nicely too… :tennis: Will come with motor mounts (not shown) Looking...

Has anyone had any experience with the EOS EF mount adaptors for the Sony Nex5/7 cameras? Just wondering about image degradation etc…

Hope this might be of use to those of you using a DX8 This clip shows how to set-up the failsafe function, so in the event of radio communication loss, the wkm will enter 'return to home' mode. I've done a short clip showing how to set-up the mix so a two position switch can be used to trigger...

can people post up the make, model of cameras they know have a live preview out function? ie: one which can EASILY be plugged into a VTx so shots can be framed from the ground? been doing this with a hero2, but need better quality images and DON'T want to go down the route of an fpv cam...

5.8gHz Video Receiver - Fatshark/ImmersionRC frequencies I Have a 5.8gHz video receiver up for grabs. Came from firstpersionview, receives on fatshark and immersionRC friendly frequencies. Full working order, selling because it's surplus to requirements now. Comes with a power connection...

Got my wkm/Y6 flying very well now, but i'm having an ongoing issue with it drifting when in GPS position hold. It's not a toilet bowl issue, just a steady drift to one side - it happens in still conditions so isn't anything to do with wind. Coax motors a aligned correctly and props spinning...

I have a spare pair of oakley jawbone sunglasses up for grabs. For all intents and purposes these are brand new and unused - as they've not been out of the house. They are a custom build from oakley uk - white frame and ear socks, silver icons and through bolts with a vented iridium VR28 lens...

Just wondered whether anyone, with a spectrum radio can help me with this: I'm trying to set-up a mix to force the channel, which controls the WKM flight modes, to move into the failsafe zone. Thus creating a controlled way of using/testing RTH without having to switch the radio off. I've...

Been working on a couple of upper plate designs which give a bit more room for a full fpv set-up, with a wkm. Here are a couple of pics of version 1. As you can see there's dedicated mounts for the gps antenna mast, VTx antenna and gunters LED mount. There's also slots on the lower upper plate...

One of my clear rail brackets has developed a crack - slightly odd because it's had no hard landings - so if anyone happens to have one i'm in the market for a replacement bracket.

I have my flamewheel(s) set up with THESE 3506/25 650Kv motors and 10x5 graupner props. I've been running them on 3 cell lipos (2200mAh), but just wondering whether 4 cell (2200mAh) packs might be a better choice. Any thoughts/experience?

I'd like to have a couple of carbon fibre or G10 plates cut for my Y6 and also my flame wheel, but seem to be having issues finding a company who will cut a small number of parts at a reasonable price. Anyone know of such a place in the UK who can do this. I can supply DXF or EPS files, just...