Search results

great choice! good luck!

hi people here it comes my latest edit from a web project on the Fogliano National Park done time ago hope you enjoy the quality of anaka-1 aerial filming solution

on the square 13 you can see the D and C connections for the I2C, then you can use the Ground connection on square 7 and that's it for the FC board on the MKBL 3.0 bottom side you can see the I2C connectors (top right of the picture) there you have the same 3 connections C - D - Ground i...

thanks stevemaller as you can see by the pictures i made my own power distribution board, based on quadframe electric plates then I dressed all the mkbl 3.0 in a very personal look and used the futaba connectors in the place of molex to connect the I2C to the flightcontroller all works fine and...

here some quick tests with GH2 and Lumix G X Vario 12-35mm raw data, just cutted and posted some flights were in windy conditions, with strong gasps, the stabilizing level remained the same total flight weight 7Kg

Hi Mike just to explain better to lock unlock the folding arms you need just one tool...the nuts are fixed on the frame, like in cinestar frames, so you access only from top and use only one screwdriver very clean and fast ;) in my setup i locked the ESCs to the arms so i saved space on the...

hi jwoike. yes the 3axis gimbal too, all the frame structure is from quadframe hi MikeSF the foldable frame in a coaxial setup takes less space by itself, if you fold it you just go to save even more space...for transport in a car for instance you decide when you need to fold them so it's up...

the first flights were good the total weight is aroud 7Kg and with a Tattu 10000mAh 6S i have 10 minutes of flight time the flight is smooth and stable the three blades coaxial setup works well and has a big airflow...on each flight i produced a lot more dust than the usual i'm still working...

here you can see my setup if you want to know more you can follow the build thread here: http://www.multirotorforums.com/showthread.php?21929-anaka-HL-build

ok people problem solved using a MK mixer preset now i'm going to tune up the gimbal and soon will post some test videos the first impression is positive, the gimbal works well and the new alexmos32 bit has very interesting features, especially the auto PID setup

ok here there are several mixer setups http://wiki.mikrokopter.de/mkm#X8 i fixed the issue using the X8 for doubloe Quadro XL V3

does anyone know a good X8 mixer configuration?

yes that's what happens it is a short issue but whenever i'm hovering and i give a small direction command it starts to wobble till it stabilize i'm pretty sure that it is mixer issue, i'm trying some other configurations, now i got strong YAW issue so i can't fly again... who has experience...

Hi Bart i'm using MKBL 3.0 you can take a look at the build here http://www.multirotorforums.com/showthread.php?21929-anaka-HL-build Hi soundman57 i already know the MK wiki and there is no X8 config in the MKtool page

just to show you what I mean

Hi MK people I just finished to assemble my latest HL setup, this time i choose to have an X8 config with latest FC 2.5, Navi, GPS and external Compass all brand new i just loaded the latest firmware, choose the X8 config and shifted 45degrees the direction of flight this is my first time...

yesterday i had the first take off....all was good but i noticed a bad behavior in the hovering i got a kind of circular wobbling...will post a video soon, mybee i need to tune up something in the MK FC settings

I did a personal version of MKBL v.3.0 they no more look like MK stuff but work and can handle KDE motors pretty well