Search results

well they handle much higher payload....based on declared motors data

no i'm using the same motor for all maybee in the future i'll use even smaller motors

Yes motopreserve you have to pay $40 more at alexmos website to activate the encoder motor license then you are able to download and install the new firmware this is fundamental to use encoder motors http://www.etecpower.com/html_products/EC45EN-81.html here you can find the motors then if...

at the moment i'm using the beta firmware for encoder Alexmos the owerall feeling is very positive, the biggest improvement is in the stability (yaw especially is really stable now) and the battery consumption is drastically reduced i had to do some hard modificatoins to the quadframe gimbal...

latest upgrade of my gimbal now with encoder motors and new Alexmos TinyPro board even lighter and stable, soon will post some tests total weight 2Kg

yes jwoike just motors and props are diferent, all the rest is unchanged have to tell you one more thing about the motors and props, both the T-Motor and the KDE 18" work well, the ESCs are fresh all the time but the motors go hot... in these days particularly warm the motors go from 45 to 55...

Hi crayfellow, i also changed the motors, on the X4 config i use the E4215XF-465 this way i can use also my old set of 4S batteries so at the end of the game i have a lighter setup with the same performances and i gain aroud 3 minutes of flight time the next step is to try the 18" foldable...

new setup with latest KDE 18" foldable blades and new X-quad configuration less mototrs less weight more efficiency same stability and performances recently this model received the Official Certification for operations in Italy and now is ready to work in the respect of the law

Hi guys...several months ago i upgraded my system to the latest MK set of boards so now i have also the new navi board and external magnet that i liked to the top of the gps antenna the thing that i noticed is that the magnet loose the calibration really quickly, sometimes after a couple of...

thank you so much Benjamin this really helps a lot! i wish all the best for your next project and let us know when it will be online

thanks Flafly i'll ask there ;)

thanks Benjamin so if there is someone from France here that want's to help us...it will be really apreciated! so any operator will enter France with all the respect of the rules

thanks Benjamin do you have any direct experiece on urban filming in France? it looks like it's impossible to do urban filming if i can't overpass the limit of 4Kg and i have to use a parachute and other safety measures..

Hi people i need to konw which safety operations are needed in frace for drone filming in urban situation who can help me on this? i don't speack french and i want to be in line with frace regulation so if someone from france can help me it would be really apreciated i saw that for urban...

you just have to assemble your rig and see how much power you need that's it ;)

consider that I use 13v on gimbal with a gh2 camera and 12-35 gfx lumix lens that is quite heavy setup... don't go to high with volts if you don't need ;)

as motopreserve says depending on how heavy is the load on the gimbal you need more than 12v to have the right stability

hi crayfellow yes i'm powering all the system with one battery, to save weight, and i have more than one BEC one for LEDs that is the MK Extension-PCB with a Traco 12V BEC https://www.mikrocontroller.com/index.php?main_page=product_info&cPath=65&products_id=576...

the coloring option it's just software based, all the recrords are b&w then colored sometines in realtime simetimes after recording

finally someone did it!! http://www.flir.com/flirvue/ check it out! it's really minded for our business