Search results

well all I know is that after over 600 flights on both naza v1 original ,and upgraded through all firmware versions as released they got better at position hold and attitude when compared to the naza lite I am unemployed and recovering due to a work accident 2.5 yrs ago so I have all day to...

"Can not access from your country " Is the message I get when trying that link for onestop rc

No worries Glad to help out , It is the little stuff that makes the big difference I learnt that with collective pitch heli's ( costly until I figured it out :) ) I now use a granite bench to do all the final squaring up and final tightening I was bummed with the 400 arms being twisted...

If the quad was your QAV were the arms alloy ? Reason I ask is I found mine used to twist along their length if you even picked it up wrong ,NOT Bend but twist and even 3° deviation from vertical on the motor shaft compared to the other arms could cause this yaw The best way to see the twist...

Try flying again in a new site those power lines will not be helping you The Naza only needs tape along the left hand side to stop rise and fall due to sunlight and not all Naza's need it There is a known problem with the baro sticking and needing a bit of a sharp lite tap on a hard surface...

It used to be on page 6 of the manual i downloaded with with y V1 NAZA Now I can only find it on the dji-wiki page http://wiki.dji.com/en/index.php/Naza-M-Precautions I don't know if it is any different with the newer firmware as DJI do not outline it anywhere that I can find

I am pretty sure that the NAZA is not recommended for anything over 650mm Not too sure if this is a marketing ploy to get you to upgrade to wookong or because of their plastic arms on everything being so flexible Plenty of people have built bigger than 650mm but I have only ever seen videos...

Sorry not my cup of tea seems to make it look even more like a kids toy , but hey each to their own Does the metallic paint cause any range/gps problems ?

That Is the auto take off to hover which is one of the updates from a few updates back Arm as normal place throttles stick to center and it will rise to a hover @ approx 1-1.5mtrs This only works in ATTI or GPS mode in manual mode you can take off as normal Only way to disable is manual...

I upgraded Both units ( Qav540G and F-550 with tarot2d Gimbal )today and 4 flights on both today no problems Both are V1 units with V2 pmu and v1 led and v1 gps Lite +gps on qav4 also rock solid

Please excuse my ignorance but what is the deal with the T8J compared to the T8FG Super running V5.0 Futaba firmware ( radio I use ) Why does this T8J work "bitchen" and the T8fg does not, are the ppm streams so different ? Just asking :tennis:

I sold my EZ-UHF as it was far from EZ and with random inputs during flight. Too much hassle not enough I.T support as windows 8 is all you can buy new in a laptop now and it still has communication errors and locks up and closes with great regularity Really got sick of being a beta tester...

I have a Naza lite on a Qav-400 and ithas been faultless as I just let it warm up for 2-3 mins or when the gps has a lock I unplug the battery for 10-15 seconds and then re-connect the battery and it is as stable as a rock even at 1800 grams ready to fly (full fpv set up) My v1 naza's did the...

Glad you have it all sorted Now go fly

At the 34s mark it seems that 2 of the motors are stopped before the others is this because of the hard landing or do you have the wrong type of vehicle (quad instead of hex ) selected in the assistant ? I would be looking at the motor rotation and prop rotation as well Then maybe look at...

I strongly recommend reading the MANUAL and watching the videos http://www.dji.com/tutorial/phantom-tutorial/ Cheers

G'Day Mate Where are you located maybe somebody local to you in Australia can help out ?

The red wire in the v2 L.E.D lead is not supplied with power on earlier Naza units there is a fix that includes soldering a resistor onto the board inside the case of the Naza This is fitted standard on some later naza V1 units and all V2 units I have seen one with power jumped from the...

Start in manual mode and quickly switch between this and GPS ending on GPS and the light should do as expected I just tried it on a DX6i and it worked fine repeatedly

Perth rc are out of stock but do list them being compatible $150 when in stock Multiwiicopter have them in stock but they are away until 24th June $176.50 and take for ever to catch up on orders if any thing like last time