Search results

oh oh oh, I think the radiolink at9 or at10 is the one to get and it comes with the receiver. I have one of those and it's great. You can get one for like 90 dollars on aliexpress or banggood. It's just like the 2oo and 300 dollar ones too. You can cheaply get a fpv set up if you search for...

I've been looking for a replacement to a failing gopro session. I like the runcam 2 and the xiaomi ya and the sjcam m10. I think the sjcam m10 might be the winner though cause although I really like the look of the runcam and the video I learned that it doesn't have that wide of angle and the...

I have a MJX 400, MJX 101, JJRC H26 and I use to have a SYMA x8w but that flew away. So I was using all my toys yesterday to find out the differences between them and I noticed that the JJRC one is not as touchy as the others or even the syma that got away a while back so it's a lot easier to...

I have 3 different modes set up for my skyline32 advanced in cleanflight. First mode has Angle, second mode has angle and headfree, 3rd has angle, headfree, baro and mag. So Mode 3 should be alt hold right? Sometimes it seems like it works ok but if I wanna move the stick to yaw it about it...

I don't think 3 weeks is enough time to do it any harm.

I wanna make the tarot 250 mini I'm building into a night flyer with the runcam owl but I need the right kind of transmitter that works with it. I have transmitters that come with the eachine cameras I get but I don't see how those will connect to the owl camera. I would like one that can plug...

if it only needs 5 volts then yeah

I get 20 minutes easily

make sure your control setting is at 1000

is it connected by ppm? you need to enable ppm in the setup

is it connected by ppm? you need to enable ppm in the setup

Oh and put ir cw and ccw motors of they have the different kinds of threading on the top prop nuts in the right spots. The way u figger it out is hold the prop nut on the shaft and then turn the motor the direction the propeller needs to spin and it it starts to screw in then its the right spot...

Heres what itll look like kinda but i was in a rush putting mine together so i have a mess of wires under it with tape covering most of it cut im going to shrink tube my wires and make it neater sometime oh and i have aome other motors i canibalized off another drone on there. Im just gonna use...

oh oh oh look at my thread called hoki drone. I listed all the parts I got to make my fpv.

This is what I've already done so it's best tested and it makes a great drone. First buy these things, Skyline32 Advanced = $30.00 http://www.banggood.com/EMAX-Skyline32-Naze32-Advanced-Flight-Controller-Barometer-Support-Cleanflight-Baseflight-p-981145.html or Skyline32 Mini (with compass for...

U can get 4 set of escs for like 20 dollars and a 4 pack of motors for around 30 and a kingkong 260 that includes 2 frames for 19 dollars and comes with a power distribution board and a skyline32 acro or mini or as low as 18 dollars to 24 dollars and then just buy the remote that usually...

I would stay away from any drones with built-in cameras cuz the cameras are usually not very good compared to a GoPro or other HD camera and usually end up spending more than it's worth you can attach a camera just about to any kind of drone as long as it's powerful enough to take the extra...

I DON'T LIKE COPTERS WITH MORE THAN 4 PROPELLERS CAUSE THEY LOOK SCARY.

I wouldn't bother with that.

Here's mine. Skyline32 advanced 12A blheli ESCs 2204 motors king kong 260 frame eachine CCD 600mw camera Leds on front and back arms siren/warning red led on top 2200 3s Floureon battery radiolink r6d receiver balance cable 3 way splitter (to power leds and camera) I also attach my gopro...