Recent content by PhilippeN

Hello, You never see the propellers please check You can find the kit without flight controller here : http://toprcsupply.com/x650-pro-frame-with-power-unit-esc-motor-blade-fr-2-3.html If you have question please feel free to ask. Philippe

Hello, Yes we use TMotor Props 12x4, balanced, they are great, but the original APC well balanced are also good but give faster change of direction. We also use lot of expo on all axis to make it more quiet for smooth videos. We used the Feiyu Gimball since the Stella was not available when we...

We used a GoPro Hero3+

Hello, We made a small Video in the Swiss Alps, It is made with a SuperX in a X650Pro Enjoy, Philippe

Hello McAND, thanks for sharing the video ! What do you mean by 1 or 2 batteries for FPV ? We always use one pack only. After some testing we discovered that the 12x4 gave us a lower vibration rate which is what we wanted to achieve for good videos. We have a very smooth flying performance with...

Yes we use the stock motors

Thanks McAND, We are using T-Motor propellers 12x4. For your motor, you should check if you don't have balancing putty touching the magnet, we had this one time. Check if all the magnets are in place. You can also control if you don't have a small metal part or screw which might enter the...

Thanks for the compliment Dhardjono, For this video we are using nVision 6400 hard case 4S packs, since it was made at 2300 m in winter we had temperature between -5°C and 0°C which gave 10 minutes flight time. In normal temperature with 10'000 mAh packs we are between 19 and 20 minutes. We...

Hello, firstly Happy New Year to all our multicopter friends around the Planet ! We prepared a small video to show what can be done with the Xaircraft X650Pro and the SuperX controller. I hope you will enjoy it, please feel free to ask questions ! Friendly, Philippe

Hello, What I can say is that when you try it you don't want to fly anything else anymore. It is just perfect and so reliable. it is not a Naza killer but a WKM killer. Philippe

Today we made our first fly with the E1100, just perfect, soon some video from the Z1400 Gimbal !

Yes they are awesome to build, today I made first test of the 850, very stable and easy.

Hello, I wanted to share with you the new models we just tested, the M850 and M650. Phil

Hello, I have a question, maaybe one Nex5 expert can help me. I am using a Nex5R, it is connected to a VTX and send image to the ground all is working fine, but I have not found how to remove the Nex5 information which are displayed on my screen and overlap my OSD. Is it a way to send only the...