Recent content by jinly

  1. jinly

    Buying a new drone, need advice :)

    Yes, the FC is actually the APM board , so you'll be using Mission Planner. It' s done there. The Cheerson CX20 and the Quantum Nova are the same machines here is a link, there are tons of these Youtibe videos on how, this is just one.
  2. jinly

    Buying a new drone, need advice :)

    Hoki, got it, sorry my mistake...you will still need a 3S 2200-2700 mah lipo. The only downside to the Radio is it's a (mode 1).
  3. jinly

    Buying a new drone, need advice :)

    What kind of flying do you want. , This is a great Aerial Photo UAV, you'll need a lipo charger and a 3S Lipo. http://www.hobbyking.com/hobbyking/store/__55107__Quanum_Nova_FPV_GPS_Waypoint_QuadCopter_w_out_Battery_Mode_1_Ready_to_Fly_.html It is comparable to the DJI Phantom. If you like...
  4. jinly

    Flying in snow

    I fly 250 class FPV in the snow. If your FC , camera, VTx, ESC's have control boards with circuits exposed, they could short. You are right snow is actually water. I use liquid tape on my exposed boards ( XCorrosion) will work also. You will need to seal the ends of your ESC Shrink wraps also...
  5. jinly

    How many here are Hams?

    I have a General Ticket...I had this way before I was into FPV or Muticopters also. I agree A lot of Ham's don't really care about the 2.4ghZ and 5.8gHZ.."The "hams " around here worry more about the other bands that get interfered with. Especially the sensitive Amateur Extra Bands . I know a...
  6. jinly

    newbuild tarot 650 looking for some advise..

    I assume you did the advanced calibration (i.e. With the craft perfectly level). Did you get at least 6 gps satellites? Are you using the default PID's? Did you check for magnetic declination?Just some suggestions
  7. jinly

    multi-rotor recommendation needed for work

    The platform seems to work nicely for you. I too have filmed miles of land in survey form. I use a 2000 watt Honda generator hooked to a 406duo iCharger connected to a 1500 W Meanwell dc/dc transformer to charge my 6S lipo's in the field. The set up was expensive, however, was invaluable in...
  8. jinly

    Why aren't there any smaller X8s?

    Nice!!!
  9. jinly

    multi-rotor recommendation needed for work

    yes. use the DJI pilot APP which is now CALLED the DJI Go APP. http://www.dji.com/product/phantom-3/goapp
  10. jinly

    My new project with a special frame.

    T- Frame..Really groovy!
  11. jinly

    multi-rotor recommendation needed for work

    +1 ! and another $.02... http://www.aerialagpros.com/
  12. jinly

    A few questions from a total neophite

    I sometimes fly my Multirotor at the Public High School My kids went to. They know me and I know them. On weekends there is hardly anyone there. Big football and soccer practice fields galore. I have not ever been approached by individuals who are demanding answers or threatening expulsion. They...
  13. jinly

    multi-rotor recommendation needed for work

    You could always go Autonomous Flights using waypoints. Maybe a RTF http://www.fpvmodel.com/tarot-ironman-fy650-bnf-rtf-ready-to-fly-_g48.html . Then add a 2.4gHz Datalink withBTU (Bluetooth Unit) and an iPAD . You could fly auto pilot routes by mapping the area needed for survey with the...
  14. jinly

    Why aren't there any smaller X8s?

    Nice!!! Yes nice gander of Quads...I happen to own my own business which has a workshop in it. I tend to build there,,,I'm married and Wife likes this stuff in a workshop...Soldering can make a mess.. not to mention I burned a hole in her linen tablecloth.. My space is looking cluttered, I love...
Top