Dji iosd???
- Thread starter Tomstoy2
- Start date
redridinghood
Member
Only place that list's them as in stock is one in The Netherlands but also demands 70 euro shipping which is a farce. Everyone else is in pre order phase.
In my mind the iOSD is needed for people using the data link and Zenmuse for use as a hub.
In my mind the iOSD is needed for people using the data link and Zenmuse for use as a hub.
quadcopters
Quadcopters.co.uk Drone Specialists
DJI OSD Module
http://quadcopters.co.uk/dji-innovations-osd-on-screen-display-module-for-dji-wookong-m-494-p.asp ours should be in any day now . We placed a very large order with DJI but I believe a few dealers have received some units a matter of days ago.
Geoff
http://quadcopters.co.uk/dji-innovations-osd-on-screen-display-module-for-dji-wookong-m-494-p.asp ours should be in any day now . We placed a very large order with DJI but I believe a few dealers have received some units a matter of days ago.
Geoff
DJi is shipping them to us this week. We ship Canada and USA for free http://shop.bradatech.com we will get them out to you as soon as they come in.
Yves
Yves
redridinghood
Member
lol I agree that Cyprus is on another planet.
Not blaming you. Just stating that the only shipping option you offer is extremely expensive.
Last edited by a moderator:
BorisS
Drone Enthusiast
Sandor, i was wondering if there is actually a configuration tool for the IOSD, or the usb port only for FW upgrades ?
The actirfical horizon looks differently to what it actually is now or the IOSD in default configuration:
Didn't get anything with it no manual or info on the assistant it available
Thanks
Boris
The actirfical horizon looks differently to what it actually is now or the IOSD in default configuration:
Didn't get anything with it no manual or info on the assistant it available
Thanks
Boris
Last edited by a moderator:
yes we know
we are trying desparatly to get a new webshop
this one is to outdated we got new contracts with couriers , trouble is we have to type all by hand.
and with about 30 orders a day its a immposible task.
with ups i can make the order ready in 20 seconds incl label.
if i use TNT it takes me 12 minutes for each order so impossbile task for now.
we are trying desparatly to get a new webshop
this one is to outdated we got new contracts with couriers , trouble is we have to type all by hand.
and with about 30 orders a day its a immposible task.
with ups i can make the order ready in 20 seconds incl label.
if i use TNT it takes me 12 minutes for each order so impossbile task for now.
Hi Sandor
I tried to connect to AV1 and AV2
I use a immersonrc 600mv tx.
I tried with seperate supply to the TX and from the OSD.
the output from the OSD i messured to 24V but I have the version 2 TX so that should be OK.
And I cant get it to swich between ch1 and ch2 and it only show ch 1 in the display.
I can see on RCG that others are having problems too.
I tried to connect to AV1 and AV2
I use a immersonrc 600mv tx.
I tried with seperate supply to the TX and from the OSD.
the output from the OSD i messured to 24V but I have the version 2 TX so that should be OK.
And I cant get it to swich between ch1 and ch2 and it only show ch 1 in the display.
I can see on RCG that others are having problems too.
ok we did about 3 rebuilds now
what i did :
i have left the power from the Zenmuse to power the TX
i have grounded both av1 - and av out - together to the TX ground
i cut the yellow wire to the TX and put them between the AV in and AV out.
worked on all occasions
i did NOT use any other cable or not even the switch to toggle between AV1 and AV2
can you check this?
we use also Immersion 600mw.
i DO have some issues comming from TX units that dont work these last weeks.
and never seen this before
what i did :
i have left the power from the Zenmuse to power the TX
i have grounded both av1 - and av out - together to the TX ground
i cut the yellow wire to the TX and put them between the AV in and AV out.
worked on all occasions
i did NOT use any other cable or not even the switch to toggle between AV1 and AV2
can you check this?
we use also Immersion 600mw.
i DO have some issues comming from TX units that dont work these last weeks.
and never seen this before
I got my iOSD from www.buildyourowndrone.co.uk about a week ago, I know they do same day shipping to the USA and Canada with FedEx, so you could have one in a few working days. I really enjoy the FPV on my Wookong! I have seen it used on an S800 spreading Wings last weekend, that is a set up!
APVXtreme
APVXtreme
I just got my iOSD and 5.8ghz tx/rx yesterday and will be setting it up this weekend. It would be nice to know where others have mounted theirs. I'd like to keep it on one of the plates but it almost makes more sense to put it on the bipod. I also received my GPS/Compass 10 days after shipping it out. Time to get busy!
VINHEX
Member
Just going to do a reshuffle on components to make look a bit neater. But placing mine on top plate for the moment, see how it runs.
Vin
DJI F550
DJI WKM
DJI DataLink 2.4Ghz
3s 3300
3s 5000
Aeroxcraft Landing Gear
Graupner 10x5 e-Props
Spektrum DX8
AR8000 Receiver
TM1000
Fatshark Attitude SD
Sony Exview Had II CCD 650 Line Sony Effio-E
Fatshark Spironet Antenna's
DJI iOSD
Vin
DJI F550
DJI WKM
DJI DataLink 2.4Ghz
3s 3300
3s 5000
Aeroxcraft Landing Gear
Graupner 10x5 e-Props
Spektrum DX8
AR8000 Receiver
TM1000
Fatshark Attitude SD
Sony Exview Had II CCD 650 Line Sony Effio-E
Fatshark Spironet Antenna's
DJI iOSD