DROIDWORX AD-6 HL - WKM BUILD and SETUP as promised

[UAVproducts]

Very nice build.

 

[jetforce]

Very nice build.

@ DJIUSA

Thanks

 

[rwilabee]

Have some folks had a problem with the AfroPower board. Where did you get the LED Board

Rich

Hi, here some pics from build:

View attachment 3914View attachment 3915View attachment 3916View attachment 3917View attachment 3918View attachment 3919View attachment 3925View attachment 3922View attachment 3923View attachment 3920View attachment 3921View attachment 3924

I Didn`t trust the Afropower-board, so i made some cable crossover to make sure it wouldn`t end up as a big fuse:tennis:

SETUP:

Droidworx AD-6 HL
Extra Enginemount for GPS mount on boom.
1x DJI Wookong-M, Data Link 2.4Ghz, M-View (Multi Waypoint in order)
6x MK3638 Motor 350W from MicroKopter
6x 40 amp esc Dualsky V2 (High modulation rate PWM (10 KHz))
6x 12x4.5 props Carbon from Mejzlik ( 13gram )
6x Extra Props for testing XOAR 13x6.5 wood
AV130 camera gimbal
Andromeda LED Pilot orientation board for Multicopters 72mm
2x 4s 5200mAh 35/70c Horeson lipos
5.8Ghz 500mw video transmitter with 3s 850mAh lipo
Canon 550D and Gopro Hero 2
Futaba T8FG Super / Rx R6208SB

Takeoff Weight: with GoPro 3520 gram.

Flight time: First test 12min used 5290mAh of the 10400mAh

Gains:

Pitch and Roll: 130% all other 100%

And here Maiden flight Video after Rendering:

AV-130 Gimbel is not activ, due to X3 is in use for Atti trimm.

 

[jetforce]

Hi Rich,

Accrording the Afroboard, no I just like to be sure that nothing happens :dejection:

Here link to the LED board : http://www.multiwiicopter.com/products/sku-23

 

[rwilabee]

Thanks Lars.... I really like that LED board

Hi Rich,

Accrording the Afroboard, no I just like to be sure that nothing happens :dejection:

Here link to the LED board : http://www.multiwiicopter.com/products/sku-23