I've decided to put together a multirotor to get into the hobby. I'm not looking for anything fancy, just something that will get me in the air and that I can learn from. I would eventually like to get into autonomous flight, but I must crawl before I walk/run.
The group-build topic is promising, but I think even that is more than I currently need. I found an article suggesting a bare-bones intro build, but I'm not so sure about the SunnySky x2208-1500s. I found mentions that they don't live up to their specs.
Therefore, I've compiled a somewhat modified build. I've run the specs past a multirotor calculation app, and it looks okay, but I'd greatly appreciate yeas or nays from some people before I pull the trigger.
Should this build work for me? Is there anything I've overlooked? Please let me know :nevreness:
The group-build topic is promising, but I think even that is more than I currently need. I found an article suggesting a bare-bones intro build, but I'm not so sure about the SunnySky x2208-1500s. I found mentions that they don't live up to their specs.
Therefore, I've compiled a somewhat modified build. I've run the specs past a multirotor calculation app, and it looks okay, but I'd greatly appreciate yeas or nays from some people before I pull the trigger.
1x Q450 frame w/ integrated PCB (F450 knock-off?)
1x KK2.1 FC
1x XT60/bullet harness (I plan to break this apart and solder the pieces to the frame's PCB)
Should this build work for me? Is there anything I've overlooked? Please let me know :nevreness: